splink/vhdl/arty_a7.vhdl

library ieee;
use ieee.std_logic_1164.all,
    ieee.numeric_std.all;

entity arty_a7 is
	generic (
		IS_SIMULATION : std_logic := '0'
	);
	port (
		n_reset     : in std_logic;
		buttons     : in std_logic_vector(3 downto 0);
		switches    : in std_logic_vector(3 downto 0);
		leds_simple : out std_logic_vector(3 downto 0);
		led0, led1, led2, led3 : out std_logic_vector(2 downto 0);

		-- Pmod connectors - A+D standard, B+C high-speed.
		-- Defined as inputs by default for safety, change
		-- when necessary
		pmod_a : out std_logic_vector(7 downto 0);
		pmod_b : out std_logic_vector(7 downto 0);
		pmod_c : in std_logic_vector(7 downto 0);
		pmod_d : out std_logic_vector(7 downto 0);

		clock_100mhz : in std_logic;

		uart_rx : in std_logic;
		uart_tx : out std_logic;

		mii_clk_25mhz : out std_logic;
		mii_n_reset   : out std_logic;
		mii_mdio      : inout std_logic;
		mii_mdc       : out std_logic;
		mii_rx_clk    : in std_logic;
		mii_rx_er     : in std_logic;
		mii_rx_dv     : in std_logic;
		mii_rx_data   : in std_logic_vector(3 downto 0);
		mii_tx_clk    : in std_logic;
		mii_tx_en     : out std_logic;
		mii_tx_data   : out std_logic_vector(3 downto 0);
		mii_col       : in std_logic;
		mii_crs       : in std_logic;

		ck_dig_l : inout std_logic_vector(13 downto 0);
		ck_dig_h : inout std_logic_vector(41 downto 26)
	);
end arty_a7;

architecture a of arty_a7 is
	constant NUM_STRANDS: positive := 24;
	signal drivers: std_logic_vector(NUM_STRANDS-1 downto 0);

	component liteeth_core is
		port (
			sys_clock : in std_logic;
			sys_reset : in std_logic;

			mii_eth_clocks_tx : in std_logic;
			mii_eth_clocks_rx : in std_logic;
			mii_eth_rst_n : out std_logic;
			mii_eth_mdio : inout std_logic;
			mii_eth_mdc : out std_logic;
			mii_eth_rx_dv : in std_logic;
			mii_eth_rx_er : in std_logic;
			mii_eth_rx_data : in std_logic_vector(3 downto 0);
			mii_eth_tx_en : out std_logic;
			mii_eth_tx_data : out std_logic_vector(3 downto 0);
			mii_eth_col : in std_logic;
			mii_eth_crs : in std_logic;

			ip_address : in std_logic_vector(31 downto 0);

			--== DHCP PORT ==--
			dhcp_ip_address : in std_logic_vector(31 downto 0);

			dhcp_sink_valid : in std_logic;
			dhcp_sink_last : in std_logic;
			dhcp_sink_ready : out std_logic;
			dhcp_sink_data : in std_logic_vector(31 downto 0);

			dhcp_source_valid : out std_logic;
			dhcp_source_last : out std_logic;
			dhcp_source_ready : in std_logic;
			dhcp_source_data : out std_logic_vector(31 downto 0);

			--== PIXEL DATA PORT ==--
			pixel_bind_port : in std_logic_vector(15 downto 0);

			-- sink
			pixel_sink_dst_ip_address : in std_logic_vector(31 downto 0);
			pixel_sink_dst_port : in std_logic_vector(15 downto 0);

			pixel_sink_length : in std_logic_vector(15 downto 0);
			pixel_sink_valid : in std_logic;
			pixel_sink_last : in std_logic;
			pixel_sink_last_be : in std_logic_vector(3 downto 0);
			pixel_sink_ready : out std_logic;
			pixel_sink_data : in std_logic_vector(31 downto 0);

			-- source
			pixel_source_src_ip_address : out std_logic_vector(31 downto 0);
			pixel_source_src_port : out std_logic_vector(15 downto 0);

			pixel_source_length : out std_logic_vector(15 downto 0);
			pixel_source_valid : out std_logic;
			pixel_source_last : out std_logic;
			pixel_source_last_be : out std_logic_vector(3 downto 0);
			pixel_source_ready : in std_logic;
			pixel_source_data : out std_logic_vector(31 downto 0)
		);
	end component;

	signal pixel_sink_length : std_logic_vector(15 downto 0);
	signal pixel_sink_valid : std_logic;
	signal pixel_sink_last : std_logic;
	signal pixel_sink_last_be : std_logic_vector(3 downto 0);
	signal pixel_sink_ready : std_logic;
	signal pixel_sink_data : std_logic_vector(31 downto 0);

	signal pixel_source_src_ip_address : std_logic_vector(31 downto 0);
	signal pixel_source_src_port : std_logic_vector(15 downto 0);

	signal pixel_source_valid : std_logic;
	signal pixel_source_last : std_logic;
	signal pixel_source_data : std_logic_vector(31 downto 0);

	component PLLE2_BASE
		generic (
			CLKFBOUT_MULT : integer;
			DIVCLK_DIVIDE : integer;

			CLKIN1_PERIOD : real;

			CLKOUT0_DIVIDE     : integer := 0;
			CLKOUT0_DUTY_CYCLE : real := 0.5;
			CLKOUT0_PHASE      : real := 0.0;

			CLKOUT1_DIVIDE     : integer := 0;
			CLKOUT1_DUTY_CYCLE : real := 0.5;
			CLKOUT1_PHASE      : real := 0.0;

			CLKOUT2_DIVIDE     : integer := 0;
			CLKOUT2_DUTY_CYCLE : real := 0.5;
			CLKOUT2_PHASE      : real := 0.0;

			CLKOUT3_DIVIDE     : integer := 0;
			CLKOUT3_DUTY_CYCLE : real := 0.5;
			CLKOUT3_PHASE      : real := 0.0;

			CLKOUT4_DIVIDE     : integer := 0;
			CLKOUT4_DUTY_CYCLE : real := 0.5;
			CLKOUT4_PHASE      : real := 0.0;

			CLKOUT5_DIVIDE     : integer := 0;
			CLKOUT5_DUTY_CYCLE : real := 0.5;
			CLKOUT5_PHASE      : real := 0.0
		);
		port (
			RST    : in std_logic;
			PWRDWN : in std_logic;
			LOCKED : out std_logic;

			CLKIN1 : in std_logic;

			CLKFBIN  : in std_logic;
			CLKFBOUT : out std_logic;

			CLKOUT0 : out std_logic;
			CLKOUT1 : out std_logic;
			CLKOUT2 : out std_logic;
			CLKOUT3 : out std_logic;
			CLKOUT4 : out std_logic;
			CLKOUT5 : out std_logic
		);
	end component PLLE2_BASE;

	signal pll_feedback : std_logic;
	signal pll_locked : std_logic;
	signal unbuf_sys_clk : std_logic;
	signal sys_clk : std_logic;

	component BUFG
		port (
			I : in std_logic;
			O : out std_logic
		);
	end component BUFG;

	signal sys_reset : std_logic;
begin
	leds_simple <= (others => '0');
	led0 <= (others => '0');
	led1 <= (others => '0');
	led2 <= (others => '0');
	led3 <= (others => '0');

	uart_tx <= '0';

	ck_dig_l <= (others => 'Z');
	ck_dig_h <= (others => 'Z');

	liteeth_inst: liteeth_core port map (
		sys_clock => sys_clk,
		sys_reset => sys_reset,

		mii_eth_clocks_tx => mii_tx_clk,
		mii_eth_clocks_rx => mii_rx_clk,
		mii_eth_rst_n => mii_n_reset,
		mii_eth_mdio => mii_mdio,
		mii_eth_mdc => mii_mdc,
		mii_eth_rx_dv => mii_rx_dv,
		mii_eth_rx_er => mii_rx_er,
		mii_eth_rx_data => mii_rx_data,
		mii_eth_tx_en => mii_tx_en,
		mii_eth_tx_data => mii_tx_data,
		mii_eth_col => mii_col,
		mii_eth_crs => mii_crs,

		ip_address => x"0a141e28", -- 10.20.30.40

		dhcp_ip_address => x"0a141e29", -- 10.20.30.41
		dhcp_sink_valid => '0',
		dhcp_sink_last => '1',
		dhcp_sink_data => x"cafebebe",

		dhcp_source_ready => '1',

		--== PIXEL DATA PORT ==--
		pixel_bind_port => x"effd", -- port 61437 - "PIXEL"

		-- sink
		pixel_sink_dst_ip_address => x"0a141e29",
		pixel_sink_dst_port => x"303a", -- port 12346

		pixel_sink_length => pixel_sink_length,
		pixel_sink_valid => pixel_sink_valid,
		pixel_sink_last => pixel_sink_last,
		pixel_sink_last_be => pixel_sink_last_be,
		pixel_sink_ready => pixel_sink_ready,
		pixel_sink_data => pixel_sink_data,

		-- source
		pixel_source_src_ip_address => pixel_source_src_ip_address,
		pixel_source_src_port => pixel_source_src_port,

		pixel_source_length => open,
		pixel_source_valid => pixel_source_valid,
		pixel_source_last => pixel_source_last,
		pixel_source_last_be => open,
		pixel_source_ready => '1',
		pixel_source_data => pixel_source_data
	);

	-- 800 MHz VCO
	-- 80 MHz system clock
	-- 25 MHz MII clock
	pll_inst: PLLE2_BASE
		generic map (
			CLKFBOUT_MULT => 8,
			DIVCLK_DIVIDE => 1,

			CLKIN1_PERIOD => 10.0,

			CLKOUT0_DIVIDE => 10,
			CLKOUT1_DIVIDE => 32,
			CLKOUT2_DIVIDE => 10,
			CLKOUT3_DIVIDE => 10,
			CLKOUT4_DIVIDE => 10,
			CLKOUT5_DIVIDE => 10
		)
		port map (
			RST    => '0',
			PWRDWN => '0',
			LOCKED => pll_locked,

			CLKIN1 => clock_100mhz,

			CLKFBIN  => pll_feedback,
			CLKFBOUT => pll_feedback,

			CLKOUT0 => unbuf_sys_clk,
			CLKOUT1 => mii_clk_25mhz
		);

	bufg_sys_clk: BUFG
		port map (
			I => unbuf_sys_clk,
			O => sys_clk
		);

	sys_reset <= not pll_locked or not n_reset;

	pmod_a <= drivers(7 downto 0);
	pmod_b <= drivers(15 downto 8);
	pmod_d <= drivers(23 downto 16);

	sender: process(sys_clk)
		constant COUNTER_MAX: natural := 80000000;
		variable counter: natural range 0 to COUNTER_MAX;

		constant NUM_WORDS: natural := 10;
		variable words_sent: natural range 0 to NUM_WORDS;
	begin
		if rising_edge(sys_clk) then
			if counter = COUNTER_MAX then
				pixel_sink_length <= std_logic_vector(to_unsigned(NUM_WORDS, 16));
				pixel_sink_data <= std_logic_vector(to_unsigned(16#30# + words_sent, 32));
				--pixel_sink_valid <= '1';

				pixel_sink_last <= '1' when words_sent = NUM_WORDS-1 else '0';

				if words_sent = NUM_WORDS then
					pixel_sink_valid <= '0';
					counter := 0;
					words_sent := 0;
				elsif pixel_sink_ready then
					words_sent := words_sent + 1;
				end if;
			else
				counter := counter + 1;
			end if;
		end if;
	end process;
	pixel_sink_last_be <= (pixel_sink_last, others => '0');

	splink: entity work.splink
		generic map (
			NUM_STRANDS => NUM_STRANDS
		)
		port map (
			clk => sys_clk,
			reset => sys_reset,

			udp_valid => pixel_source_valid,
			udp_last => pixel_source_last,
			udp_data => pixel_source_data,

			drivers => drivers
		);
end architecture;