aps: Improve documentation

This commit is contained in:
Daniel Gröber 2018-09-02 21:27:01 +02:00
parent 30c57fdbcf
commit fb97956d6c
3 changed files with 42 additions and 697 deletions

View file

@ -2,35 +2,55 @@ ITS WiFi Access Points Setup
============================ ============================
We build the access points in use at the space using the LEDE/OpenWrt image We build the access points in use at the space using the LEDE/OpenWrt image
builder. The deployed images are completely hands-off no configuration of the builder. The deployed images are completely hands-off. No configuration of the
running firmware should be necessary as all the device specific setup is done running firmware should be necessary as all the device specific setup is done
using `/etc/uci-defaults/` by keying off the MAC address. using `/etc/uci-defaults/` by keying off the device's MAC address.
See [`files/common/its/etc/uci-defaults/50-config-from-mac`](files/common/its/etc/uci-defaults/50-config-from-mac) for details. See [`files/common/its/etc/uci-defaults/50-config-from-mac`](files/common/its/etc/uci-defaults/50-config-from-mac) for details.
Building Images Building Images
--------------- ---------------
To build the `its` images, run: The [`Makefile`][./Makefile] provides a target for each device type we have
images for, to build images for all devices at the space you can use:
``` ```
$ make its $ make its
[...]
Wrote images to images/v0.20180506-3-g115cc99-dirty
``` ```
the resulting images land in `images/v0.$(date +'%Y%m%d')`. The build system the resulting sysupgrade images land in a directory in `images/`. The symlink
also produces a `*.image-manifest` file which contains the URL to the `images/latest` points to the directory of the image built most recently. The
ImageBuilder used as well its hash and the corresponding image's hash. build system also produces a `*.image-manifest` file which contains the URL to
the ImageBuilder used as well its hash and the corresponding image's hash.
Each produced image file contains the target, subtarget and profile names for
the targeted device (among other things), for example the Ubiquity UniFi AC
Lite's image is called `*-ar71xx-generic-ubnt-unifiac-lite*-sysupgrade.bin`
standing for `TARGET=ar71xx`, `SUBTARGET=generic`, `PROFILE=ubnt-unifiac-lite`.
These images can then be deployed by copying them to the respective device in
`/tmp` using `scp` and then running, over ssh:
# sysupgrade -n /tmp/*-sysupgrade.bin
If this fails for some reason and the target device is subsequently bricked so
bad it cannot even boot into
[failsafe mode](https://openwrt.org/docs/guide-user/troubleshooting/failsafe_and_factory_reset#entering_failsafe_mode)
any more, see
[OpenWrt Debricking Guide](https://openwrt.org/docs/guide-user/troubleshooting/generic.debrick).
Using Released Binaries Using Released Binaries
----------------------- -----------------------
The offically released and deployed images are added to the repo using The offically released and deployed images are available in this repo in the
[`git annex`](https://git-annex.branchable.com) since this will not actually add [`images/`](images/) directory. They need to be retrived from an internal server
the files to git but rather just a symlink containing its hash. The actual using [`git annex`](https://git-annex.branchable.com) before they can be
binary images can then be uploaded to an internal server. accessed. The public git repo only contains their hashes.
We also use git-annex to add secrets to the repo which will then only be We also use git-annex to add the secrets used for generating the images to the
available to authorized people using the internal git-annex store. For an repo, which will then only be available to authorized people using the internal
example, see git-annex store. For an example, see
[`files/common/its/etc/uci-defaults/51-secrets`](files/common/its/etc/uci-defaults/51-secrets). This [`files/common/its/etc/uci-defaults/51-secrets`](files/common/its/etc/uci-defaults/51-secrets). This
file just sets up secrets, such as the WiFi/root password. file just sets up secrets, such as the WiFi/root password.

View file

@ -28,6 +28,7 @@ tar -C "$BUILDDIR" -axf "$DLDIR"/"$imagebuilder"
IMAGEBUILDER_DIR="$BUILDDIR"/"$(tar -atf "$DLDIR"/"$imagebuilder" | head -n1)" IMAGEBUILDER_DIR="$BUILDDIR"/"$(tar -atf "$DLDIR"/"$imagebuilder" | head -n1)"
# source control file and extract variables
profile=$(. "$CONTROL"; echo "${PROFILE}") profile=$(. "$CONTROL"; echo "${PROFILE}")
target=$(. "$CONTROL"; echo "${TARGET}") target=$(. "$CONTROL"; echo "${TARGET}")
subtarget=$(. "$CONTROL"; echo "${SUBTARGET}") subtarget=$(. "$CONTROL"; echo "${SUBTARGET}")
@ -35,6 +36,7 @@ subtarget=$(. "$CONTROL"; echo "${SUBTARGET}")
( (
IFS=' IFS='
' '
# `make` below consumes these
export PROFILE PACKAGES export PROFILE PACKAGES
. "$CONTROL" . "$CONTROL"
@ -59,6 +61,8 @@ subtarget=$(. "$CONTROL"; echo "${SUBTARGET}")
cp "$IMAGEBUILDER_DIR"/bin/targets/ar71xx/"${subtarget}"/openwrt*-"${target}-${subtarget}-${profile}"-squashfs-sysupgrade.bin "$IMAGEDIR"/ cp "$IMAGEBUILDER_DIR"/bin/targets/ar71xx/"${subtarget}"/openwrt*-"${target}-${subtarget}-${profile}"-squashfs-sysupgrade.bin "$IMAGEDIR"/
ln -snf "$VERSION" images/latest
{ {
printf '%s\n' "Date: $(date -R)" printf '%s\n' "Date: $(date -R)"
printf '%s\n' "Image-Builder: $IMAGEBUILDER_URL" printf '%s\n' "Image-Builder: $IMAGEBUILDER_URL"
@ -69,3 +73,8 @@ cp "$IMAGEBUILDER_DIR"/bin/targets/ar71xx/"${subtarget}"/openwrt*-"${target}-${s
( cd "$IMAGEDIR"; sha512sum openwrt*-"${target}-${subtarget}-${profile}"-squashfs-sysupgrade.bin ) ( cd "$IMAGEDIR"; sha512sum openwrt*-"${target}-${subtarget}-${profile}"-squashfs-sysupgrade.bin )
} | sed 's/^/ /' } | sed 's/^/ /'
} > "$IMAGEDIR"/"${profile}".image-manifest } > "$IMAGEDIR"/"${profile}".image-manifest
echo
echo
echo "Wrote images to $IMAGEDIR"
echo

View file

@ -1,684 +0,0 @@
# Reinstall guide for Openwrt based APs (TL-WR841N/ND)
# ====================================================
alias $=true # make sure this file is a valid shell script
$ wget https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/OpenWrt-ImageBuilder-ar71xx-generic.Linux-x86_64.tar.bz2
$ tar -xf OpenWrt-ImageBuilder-ar71xx-generic.Linux-x86_64.tar.bz2
$ cd OpenWrt-ImageBuilder-ar71xx-generic.Linux-x86_64/
$ sh <WHEREVER>/doc-ap-reinstall.txt # yes, seriously
$ make image PROFILE=TLWR841 FILES=files/ PACKAGES="collectd collectd-mod-wireless collectd-mod-interface collectd-mod-load collectd-mod-network -firewall -ip6tables -kmod-ip6tables"
# Now you should get the binary for flashing at:
# bin/ar71xx/openwrt-ar71xx-generic-tl-wr841n-v10-squashfs-sysupgrade.bin
# If your ssh key is in the config you can now connect to any LAN port (orange)
# on the AP, trigger a failsafe reset, scp the image into /tmp and flash the AP (see below).
# If it's not just add it to files/etc/dropbear/authorized_keys before running make
# 1) trigger factory reset (deletes /dev/mtdblock3, i.e. /overlay):
$ firstboot -y
# type 'y' and ENTER
$ reboot -f
# 2) wait for the router to come back up, do the failsafe mode dance again
# finally and copy the image there:
$ scp bin/ar71xx/openwrt-ar71xx-generic-tl-wr841n-v10-squashfs-sysupgrade.bin root@192.168.1.1:/tmp
# 3) finally flash the AP:
$ sysupgrade openwrt-*.bin
# now connect the WAN port (blue) to the correct patch port and make sure this
# is connected to VLAN 2 on SW0 (ports 29,30,31,32,33,34 are for now)
# WTF?
# /bin/sh ignores lines that start with '#' and the 'alias' above makes sure '$'
# is not a command that exists, so everything in this file is ignored up the the
# shar(1) archive, neat huh?
# ---- shar archive follows ----
#!/bin/sh
# This is a shell archive (produced by GNU sharutils 4.15.2).
# To extract the files from this archive, save it to some FILE, remove
# everything before the '#!/bin/sh' line above, then type 'sh FILE'.
#
lock_dir=_sh06036
# Made on 2016-06-06 01:42 CEST by <dxld@Sam>.
# Source directory was '/home/dxld/var/build/OpenWrt-ImageBuilder-ar71xx-generic.Linux-x86_64'.
#
# Existing files will *not* be overwritten, unless '-c' is specified.
#
# This shar contains:
# length mode name
# ------ ---------- ------------------------------------------
# 611 -rw------- files/etc/collectd.conf
# 286 -rw-r--r-- files/etc/config/dhcp
# 136 -rw-r--r-- files/etc/config/dropbear
# 105 -rw-r--r-- files/etc/config/firewall
# 630 -rw-r--r-- files/etc/config/network
# 1063 -rw-r--r-- files/etc/config/system
# 0 -rw-r--r-- files/etc/config/ubootenv
# 325 -rw-r--r-- files/etc/config/wireless
# 390 -rw-r--r-- files/etc/dropbear/authorized_keys
# 503 -rwxr-xr-x files/etc/uci-defaults/50-config-from-mac
#
MD5SUM=${MD5SUM-md5sum}
f=`${MD5SUM} --version | egrep '^md5sum .*(core|text)utils'`
test -n "${f}" && md5check=true || md5check=false
${md5check} || \
echo 'Note: not verifying md5sums. Consider installing GNU coreutils.'
if test "X$1" = "X-c"
then keep_file=''
else keep_file=true
fi
echo=echo
save_IFS="${IFS}"
IFS="${IFS}:"
gettext_dir=
locale_dir=
set_echo=false
for dir in $PATH
do
if test -f $dir/gettext \
&& ($dir/gettext --version >/dev/null 2>&1)
then
case `$dir/gettext --version 2>&1 | sed 1q` in
*GNU*) gettext_dir=$dir
set_echo=true
break ;;
esac
fi
done
if ${set_echo}
then
set_echo=false
for dir in $PATH
do
if test -f $dir/shar \
&& ($dir/shar --print-text-domain-dir >/dev/null 2>&1)
then
locale_dir=`$dir/shar --print-text-domain-dir`
set_echo=true
break
fi
done
if ${set_echo}
then
TEXTDOMAINDIR=$locale_dir
export TEXTDOMAINDIR
TEXTDOMAIN=sharutils
export TEXTDOMAIN
echo="$gettext_dir/gettext -s"
fi
fi
IFS="$save_IFS"
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null
then if (echo -n test; echo 1,2,3) | grep n >/dev/null
then shar_n= shar_c='
'
else shar_n=-n shar_c= ; fi
else shar_n= shar_c='\c' ; fi
f=shar-touch.$$
st1=200112312359.59
st2=123123592001.59
st2tr=123123592001.5 # old SysV 14-char limit
st3=1231235901
if touch -am -t ${st1} ${f} >/dev/null 2>&1 && \
test ! -f ${st1} && test -f ${f}; then
shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"'
elif touch -am ${st2} ${f} >/dev/null 2>&1 && \
test ! -f ${st2} && test ! -f ${st2tr} && test -f ${f}; then
shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"'
elif touch -am ${st3} ${f} >/dev/null 2>&1 && \
test ! -f ${st3} && test -f ${f}; then
shar_touch='touch -am $3$4$5$6$2 "$8"'
else
shar_touch=:
echo
${echo} 'WARNING: not restoring timestamps. Consider getting and
installing GNU '\''touch'\'', distributed in GNU coreutils...'
echo
fi
rm -f ${st1} ${st2} ${st2tr} ${st3} ${f}
#
if test ! -d ${lock_dir} ; then :
else ${echo} "lock directory ${lock_dir} exists"
exit 1
fi
if mkdir ${lock_dir}
then ${echo} "x - created lock directory ${lock_dir}."
else ${echo} "x - failed to create lock directory ${lock_dir}."
exit 1
fi
# ============= files/etc/collectd.conf ==============
if test ! -d 'files'; then
mkdir 'files'
if test $? -eq 0
then ${echo} "x - created directory files."
else ${echo} "x - failed to create directory files."
exit 1
fi
fi
if test ! -d 'files/etc'; then
mkdir 'files/etc'
if test $? -eq 0
then ${echo} "x - created directory files/etc."
else ${echo} "x - failed to create directory files/etc."
exit 1
fi
fi
if test -n "${keep_file}" && test -f 'files/etc/collectd.conf'
then
${echo} "x - SKIPPING files/etc/collectd.conf (file already exists)"
else
${echo} "x - extracting files/etc/collectd.conf (text)"
sed 's/^X//' << 'SHAR_EOF' > 'files/etc/collectd.conf' &&
# Config file for collectd. More info: https://collectd.org/
# Note: Luci statistics will generate a new config and overwrite this file.
X
#Hostname "localhost"
#FQDNLookup true
BaseDir "/var/run/collectd"
Include "/etc/collectd/conf.d"
PIDFile "/var/run/collectd.pid"
PluginDir "/usr/lib/collectd"
TypesDB "/usr/share/collectd/types.db"
Interval 30
ReadThreads 2
X
LoadPlugin interface
LoadPlugin load
#LoadPlugin ping
X
<Plugin interface>
X IgnoreSelected false
X Interface "lan""
</Plugin>
X
LoadPlugin network
<Plugin network>
X Server "sozial.asozial" "25826"
X Forward false
</Plugin>
X
X
LoadPlugin wireless
SHAR_EOF
(set 20 16 03 14 20 20 43 'files/etc/collectd.conf'
eval "${shar_touch}") && \
chmod 0600 'files/etc/collectd.conf'
if test $? -ne 0
then ${echo} "restore of files/etc/collectd.conf failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/collectd.conf': 'MD5 check failed'
) << \SHAR_EOF
317af4e906f9877fb3942b2c969ec6f8 files/etc/collectd.conf
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/collectd.conf'` -ne 611 && \
${echo} "restoration warning: size of 'files/etc/collectd.conf' is not 611"
fi
fi
# ============= files/etc/config/dhcp ==============
if test ! -d 'files/etc'; then
mkdir 'files/etc'
if test $? -eq 0
then ${echo} "x - created directory files/etc."
else ${echo} "x - failed to create directory files/etc."
exit 1
fi
fi
if test ! -d 'files/etc/config'; then
mkdir 'files/etc/config'
if test $? -eq 0
then ${echo} "x - created directory files/etc/config."
else ${echo} "x - failed to create directory files/etc/config."
exit 1
fi
fi
if test -n "${keep_file}" && test -f 'files/etc/config/dhcp'
then
${echo} "x - SKIPPING files/etc/config/dhcp (file already exists)"
else
${echo} "x - extracting files/etc/config/dhcp (text)"
sed 's/^X//' << 'SHAR_EOF' > 'files/etc/config/dhcp' &&
X
config dnsmasq
X option listen 0
X
config dhcp 'lan'
X option interface 'lan'
X option ignore 1
X
config dhcp 'wan'
X option interface 'wan'
X option ignore '1'
X
config odhcpd 'odhcpd'
X option maindhcp '0'
X option leasefile '/tmp/hosts/odhcpd'
X option leasetrigger '/usr/sbin/odhcpd-update'
X
SHAR_EOF
(set 20 16 02 18 23 07 05 'files/etc/config/dhcp'
eval "${shar_touch}") && \
chmod 0644 'files/etc/config/dhcp'
if test $? -ne 0
then ${echo} "restore of files/etc/config/dhcp failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/config/dhcp': 'MD5 check failed'
) << \SHAR_EOF
14380207dcdfc80dcf7ad0f874385a4f files/etc/config/dhcp
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/config/dhcp'` -ne 286 && \
${echo} "restoration warning: size of 'files/etc/config/dhcp' is not 286"
fi
fi
# ============= files/etc/config/dropbear ==============
if test ! -d 'files/etc/config'; then
mkdir 'files/etc/config'
if test $? -eq 0
then ${echo} "x - created directory files/etc/config."
else ${echo} "x - failed to create directory files/etc/config."
exit 1
fi
fi
if test -n "${keep_file}" && test -f 'files/etc/config/dropbear'
then
${echo} "x - SKIPPING files/etc/config/dropbear (file already exists)"
else
${echo} "x - extracting files/etc/config/dropbear (text)"
sed 's/^X//' << 'SHAR_EOF' > 'files/etc/config/dropbear' &&
config dropbear
X option PasswordAuth 'off'
X option RootPasswordAuth 'off'
X option Port '22'
# option BannerFile '/etc/banner'
SHAR_EOF
(set 20 16 02 19 01 22 09 'files/etc/config/dropbear'
eval "${shar_touch}") && \
chmod 0644 'files/etc/config/dropbear'
if test $? -ne 0
then ${echo} "restore of files/etc/config/dropbear failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/config/dropbear': 'MD5 check failed'
) << \SHAR_EOF
4e428f3d36b40c3de857bf73d3bc27ce files/etc/config/dropbear
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/config/dropbear'` -ne 136 && \
${echo} "restoration warning: size of 'files/etc/config/dropbear' is not 136"
fi
fi
# ============= files/etc/config/firewall ==============
if test -n "${keep_file}" && test -f 'files/etc/config/firewall'
then
${echo} "x - SKIPPING files/etc/config/firewall (file already exists)"
else
${echo} "x - extracting files/etc/config/firewall (text)"
sed 's/^X//' << 'SHAR_EOF' > 'files/etc/config/firewall' &&
config defaults
X option syn_flood 1
X option input ACCEPT
X option output ACCEPT
X option forward ACCEPT
SHAR_EOF
(set 20 16 03 14 20 19 47 'files/etc/config/firewall'
eval "${shar_touch}") && \
chmod 0644 'files/etc/config/firewall'
if test $? -ne 0
then ${echo} "restore of files/etc/config/firewall failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/config/firewall': 'MD5 check failed'
) << \SHAR_EOF
3aca9392cad163a47cd8ed892ad1fbee files/etc/config/firewall
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/config/firewall'` -ne 105 && \
${echo} "restoration warning: size of 'files/etc/config/firewall' is not 105"
fi
fi
# ============= files/etc/config/network ==============
if test -n "${keep_file}" && test -f 'files/etc/config/network'
then
${echo} "x - SKIPPING files/etc/config/network (file already exists)"
else
${echo} "x - extracting files/etc/config/network (text)"
sed 's/^X//' << 'SHAR_EOF' > 'files/etc/config/network' &&
X
config interface 'loopback'
X option ifname 'lo'
X option proto 'static'
X option ipaddr '127.0.0.1'
X option netmask '255.0.0.0'
X
config interface 'apctl'
X option ifname 'eth1.2'
X option proto 'dhcp'
X
config interface 'lan'
X option type 'bridge'
X option ifname 'eth1'
X option proto 'static'
X
config interface 'recovery'
X option type 'bridge'
X option ifname 'eth0'
X option proto 'static'
X option ipaddr '192.168.1.1'
X option netmask '255.0.0.0'
X
X
config switch
X option name 'switch0'
X option reset '1'
X option enable '1'
X option enable_vlan '1'
X
config switch_vlan
X option device 'switch0'
X option vlan '1'
X option ports '1 2 3 4 0'
SHAR_EOF
(set 20 16 03 14 20 26 56 'files/etc/config/network'
eval "${shar_touch}") && \
chmod 0644 'files/etc/config/network'
if test $? -ne 0
then ${echo} "restore of files/etc/config/network failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/config/network': 'MD5 check failed'
) << \SHAR_EOF
e953d88ed06acffbef2e9086fa727fd7 files/etc/config/network
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/config/network'` -ne 630 && \
${echo} "restoration warning: size of 'files/etc/config/network' is not 630"
fi
fi
# ============= files/etc/config/system ==============
if test -n "${keep_file}" && test -f 'files/etc/config/system'
then
${echo} "x - SKIPPING files/etc/config/system (file already exists)"
else
${echo} "x - extracting files/etc/config/system (text)"
sed 's/^X//' << 'SHAR_EOF' > 'files/etc/config/system' &&
X
config system
X option hostname 'ITS-AP-unassigned'
X option timezone 'UTC'
X
config timeserver 'ntp'
X list server '0.openwrt.pool.ntp.org'
X list server '1.openwrt.pool.ntp.org'
X list server '2.openwrt.pool.ntp.org'
X list server '3.openwrt.pool.ntp.org'
X option enabled '1'
X option enable_server '0'
X
config led 'led_wan'
X option name 'WAN'
X option sysfs 'tp-link:green:wan'
X option trigger 'netdev'
X option mode 'link tx rx'
X option dev 'eth1'
X
config led 'led_lan1'
X option name 'LAN1'
X option sysfs 'tp-link:green:lan1'
X option trigger 'switch0'
X option port_mask '0x10'
X
config led 'led_lan2'
X option name 'LAN2'
X option sysfs 'tp-link:green:lan2'
X option trigger 'switch0'
X option port_mask '0x08'
X
config led 'led_lan3'
X option name 'LAN3'
X option sysfs 'tp-link:green:lan3'
X option trigger 'switch0'
X option port_mask '0x04'
X
config led 'led_lan4'
X option name 'LAN4'
X option sysfs 'tp-link:green:lan4'
X option trigger 'switch0'
X option port_mask '0x02'
X
config led 'led_wlan'
X option name 'WLAN'
X option sysfs 'tp-link:green:wlan'
X option trigger 'phy0tpt'
SHAR_EOF
(set 20 16 03 14 17 41 57 'files/etc/config/system'
eval "${shar_touch}") && \
chmod 0644 'files/etc/config/system'
if test $? -ne 0
then ${echo} "restore of files/etc/config/system failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/config/system': 'MD5 check failed'
) << \SHAR_EOF
9473b26be0e31d238df7fb716f2b4964 files/etc/config/system
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/config/system'` -ne 1063 && \
${echo} "restoration warning: size of 'files/etc/config/system' is not 1063"
fi
fi
# ============= files/etc/config/ubootenv ==============
if test -n "${keep_file}" && test -f 'files/etc/config/ubootenv'
then
${echo} "x - SKIPPING files/etc/config/ubootenv (file already exists)"
else
${echo} "x - extracting files/etc/config/ubootenv (empty)"
> 'files/etc/config/ubootenv' &&
(set 20 16 02 07 15 30 04 'files/etc/config/ubootenv'
eval "${shar_touch}") && \
chmod 0644 'files/etc/config/ubootenv'
if test $? -ne 0
then ${echo} "restore of files/etc/config/ubootenv failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/config/ubootenv': 'MD5 check failed'
) << \SHAR_EOF
d41d8cd98f00b204e9800998ecf8427e files/etc/config/ubootenv
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/config/ubootenv'` -ne 0 && \
${echo} "restoration warning: size of 'files/etc/config/ubootenv' is not 0"
fi
fi
# ============= files/etc/config/wireless ==============
if test -n "${keep_file}" && test -f 'files/etc/config/wireless'
then
${echo} "x - SKIPPING files/etc/config/wireless (file already exists)"
else
${echo} "x - extracting files/etc/config/wireless (text)"
sed 's/^X//' << 'SHAR_EOF' > 'files/etc/config/wireless' &&
config wifi-device radio0
X option type mac80211
X option channel 11
X option hwmode 11g
X option path 'platform/qca953x_wmac'
X option htmode HT20
X
config wifi-iface
X option device radio0
X option network lan
X option mode ap
X option ssid it-syndikat
X option encryption psk2
X option key '<WIRELESS KEY HERE>'
SHAR_EOF
(set 20 16 06 06 01 41 58 'files/etc/config/wireless'
eval "${shar_touch}") && \
chmod 0644 'files/etc/config/wireless'
if test $? -ne 0
then ${echo} "restore of files/etc/config/wireless failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/config/wireless': 'MD5 check failed'
) << \SHAR_EOF
06b38e06f26ea56e8a8e5f51a6566ff8 files/etc/config/wireless
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/config/wireless'` -ne 325 && \
${echo} "restoration warning: size of 'files/etc/config/wireless' is not 325"
fi
fi
# ============= files/etc/dropbear/authorized_keys ==============
if test ! -d 'files/etc/dropbear'; then
mkdir 'files/etc/dropbear'
if test $? -eq 0
then ${echo} "x - created directory files/etc/dropbear."
else ${echo} "x - failed to create directory files/etc/dropbear."
exit 1
fi
fi
if test -n "${keep_file}" && test -f 'files/etc/dropbear/authorized_keys'
then
${echo} "x - SKIPPING files/etc/dropbear/authorized_keys (file already exists)"
else
${echo} "x - extracting files/etc/dropbear/authorized_keys (text)"
sed 's/^X//' << 'SHAR_EOF' | uudecode &&
begin 600 files/etc/dropbear/authorized_keys
M<W-H+7)S82!!04%!0C-.>F%#,7EC,D5!04%!1$%104)!04%"05%#,41B=VMS
M>75-,FE652]M4U-18CAF8U14,W-M3T1Y96%Z=%!V<&8Q94\T.61N-$UE8T%C
M534X>G$R9S1$2W5M0S5Q,6)#<DUQ<&A9.65A*U534W)9<&8K6BLK9F5Z3W-0
M>&%D-$UR-&EX=3!(83A6;S1#3$-F1'AC07A::%EU;$%X;E!D,G<X9T)Y25%)
M56YM1UI"1WE!6'5$,%EX:2LR8W!N,VI'5TDQ3CDV8W=Y:%-Z63`O46UJ9F55
M8G%B*W!D:45J;2]*5$)U;R]S0FUF2FUD.5%A>4UV>$]Z,5)R>C%4=4\X.79M
M+U9L,5`K:TE&4W1O0G-%955(."M9<75)4'50<6=Q,V0V2"MI538X3DYT8G!9
M07=-2E,S,'5M-'5H=2]X3R]62&-L0V%F<4]U47994FMJ0DI!4DY0;4UL+T15
>8VET:$Y#5S)!=D1C=$IS6G!",6P@9'AL9$!%;&D*
`
end
SHAR_EOF
(set 20 16 02 19 01 22 39 'files/etc/dropbear/authorized_keys'
eval "${shar_touch}") && \
chmod 0644 'files/etc/dropbear/authorized_keys'
if test $? -ne 0
then ${echo} "restore of files/etc/dropbear/authorized_keys failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/dropbear/authorized_keys': 'MD5 check failed'
) << \SHAR_EOF
9641a516022df2dc59a071c9d16be7aa files/etc/dropbear/authorized_keys
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/dropbear/authorized_keys'` -ne 390 && \
${echo} "restoration warning: size of 'files/etc/dropbear/authorized_keys' is not 390"
fi
fi
# ============= files/etc/uci-defaults/50-config-from-mac ==============
if test ! -d 'files/etc/uci-defaults'; then
mkdir 'files/etc/uci-defaults'
if test $? -eq 0
then ${echo} "x - created directory files/etc/uci-defaults."
else ${echo} "x - failed to create directory files/etc/uci-defaults."
exit 1
fi
fi
if test -n "${keep_file}" && test -f 'files/etc/uci-defaults/50-config-from-mac'
then
${echo} "x - SKIPPING files/etc/uci-defaults/50-config-from-mac (file already exists)"
else
${echo} "x - extracting files/etc/uci-defaults/50-config-from-mac (text)"
sed 's/^X//' << 'SHAR_EOF' > 'files/etc/uci-defaults/50-config-from-mac' &&
#!/bin/sh
set -e
X
mac=$(cat /sys/class/net/eth1/address)
X
hostname=
channel=
if [ "$mac" = 60:e3:27:b8:16:ed ]; then
X hostname=cz-ap0
X channel=6
elif [ "$mac" = 60:e3:27:b8:09:db ]; then
X hostname=cz-ap1
X channel=12
elif [ "$mac" = 60:e3:27:ed:9b:b1 ]; then
X hostname=cz-ap2
X channel=1
fi
X
uci set system.@system[0].hostname=$hostname
uci commit system
uci set wireless.radio0.channel=$channel
uci commit wireless
echo $(uci get system.@system[0].hostname) > /proc/sys/kernel/hostname
SHAR_EOF
(set 20 16 03 20 16 53 15 'files/etc/uci-defaults/50-config-from-mac'
eval "${shar_touch}") && \
chmod 0755 'files/etc/uci-defaults/50-config-from-mac'
if test $? -ne 0
then ${echo} "restore of files/etc/uci-defaults/50-config-from-mac failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/uci-defaults/50-config-from-mac': 'MD5 check failed'
) << \SHAR_EOF
689a299be8256d569a668704a26d27c3 files/etc/uci-defaults/50-config-from-mac
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/uci-defaults/50-config-from-mac'` -ne 503 && \
${echo} "restoration warning: size of 'files/etc/uci-defaults/50-config-from-mac' is not 503"
fi
fi
if rm -fr ${lock_dir}
then ${echo} "x - removed lock directory ${lock_dir}."
else ${echo} "x - failed to remove lock directory ${lock_dir}."
exit 1
fi
exit 0