49 lines
2 KiB
TeX
49 lines
2 KiB
TeX
\subsection{Testing and Measurement}
|
|
|
|
For functional testing and verification of implementation goals measurements
|
|
needed to be performed in various different ways and testing software was
|
|
required.
|
|
|
|
\subsubsection{Measurements}
|
|
|
|
Measurements were performed, if not noted otherwise, with the Analog Discovery
|
|
2 from Digilent as it has 16bit digital I/O Pins as well a a Waveform generator
|
|
and 2 differential oszilloscope inputs\cite{ad2}. These were enough for all
|
|
nescessary measurements. Though due to the size and construction of the device,
|
|
which can be seen in figure \ref{fig:ad2},
|
|
errors were encountered while performing the measurements. These are noted on
|
|
occurance.
|
|
|
|
\begin{figure}[H]
|
|
\centering
|
|
\includegraphics[width=.6\textwidth, angle=0]{pics/ad2}
|
|
\caption{Digilent Analog Discovery 2;Source: \url{https://www.sparkfun.com/}}
|
|
\label{fig:ad2}
|
|
\end{figure}
|
|
|
|
\subsubsection{Testing}
|
|
|
|
All testing was performed with an Atmel ATMega2560 due to it's large amount
|
|
of I/O pins, 5V I/O, which is the more common voltage level on CMOS
|
|
peripherials, way of addressing pins (8 at a time) and availability.
|
|
\cite{atmega2560} All
|
|
testing software was written for this ATMega and compiled using the avr-gcc
|
|
from the GNU-Project.
|
|
|
|
To fully test the developed modules on the backplane a seprate module for the
|
|
ATMega was developed, which can be seen in figure \ref{fig:atmega_mod}. The
|
|
ATMega is beneath the the black PCB \footnote{Printed circuit board} in the
|
|
center, which is an Arduino\texttrademark Mega. The Arduino\texttrademark is,
|
|
for all indends and purposes, only a breakout of the ATMega 2560 and has only
|
|
been used in that way. No parts of the Arduino\texttrademark IDE or other parts
|
|
of the Arduino\texttrademark software suite have been used, as they consume too
|
|
much memory and the abstraction models used are not compatiable with building
|
|
processor peripherials.
|
|
|
|
\begin{figure}[H]
|
|
\centering
|
|
\includegraphics[width=\textwidth, angle=0]{pics/atmega}
|
|
\caption{The ATMega 2560 module for the backplane}
|
|
\label{fig:atmega_mod}
|
|
\end{figure}
|
|
|