dipl/preamble.tex

453 lines
14 KiB
TeX
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

%based on xhversion{v3.01 SiU} %PdJ,PdL,PdM,PdS,PdU,Pe6,PeI,PfB,PfD,RbN,RbP,RcL,RdC,RdD,RdF,Sb7,ScN,SiT,SiU,Sj3,
%
% Inherited from Michale Reitmeir, 2019, adopted by tyrolyean 2020
% adoption for usage with xelatex and a lot of stuff beeing thrown out because
% xelatex doesn't care about them.
%
\listfiles %lists included files while processing 'pdflatex'
\documentclass[12pt,a4paper]{article}
%\documentclass[12pt,a4paper]{book}
%\documentclass[11pt,a4paper]{article}
%\documentclass[12pt,a4paper]{report}
%\usepackage{etex} %gegen 'no more room for new dimen...' error bei 'tikz' xh@RaE1
\usepackage[utf8]{inputenc}
\usepackage[english,ngerman,]{babel}
\selectlanguage{english}
\usepackage[OT2,T1]{fontenc}
\usepackage{svg} % Allows the inclusion of SVG files
\usepackage{amssymb}
\usepackage{ulem}
\usepackage{amsmath}
\usepackage{amscd}
%\usepackage{extarrows} %\xleftrightarrow[obentext]{untentext}
\usepackage{wasysym}
\usepackage{pxfonts}
\usepackage{verbatim}
\usepackage{alltt}
\usepackage{moreverb}
\usepackage{graphicx}
\usepackage{wrapfig}
%\usepackage{subfigure} % Probleme mit tocloft? -MR
%\usepackage{theorem}
%\usepackage[dvips]{color}
%\usepackage{lmodern}
%\usepackage{textcomp}
\usepackage{multicol} % 2-, 3-, ... -spaltige Formatierung mit 'multicols'
\usepackage{multirow} % fuer 'tabular' - Tabellen
%\usepackage{makeidx}
\usepackage{imakeidx} % erspart dieses externe Stichwortprogramm
%\usepackage{pdfpages} % fuer 'includepdf' (stattdessen nimmi meistens 'includegraphics[page=1,...]')
\usepackage{mdwlist} % f. 'compact lists' "itemize*", "enumerate*", "description*"
%\usepackage{ulem} %... produziertma nFehler ban 'latex' run
\usepackage{longtable} % fuer tabellen ueber mehrere Seiten
\usepackage{makecell} % Zeilenumbruch in Tabellenzelle -MR
\usepackage{xcolor}
\definecolor{lltgy} {gray}{0.96} % selbstdefinierte Farben
\definecolor{ltgy} {gray}{0.91}
\definecolor{dkgn} {rgb}{0.0,0.7,0.0}
\definecolor{dkbu} {rgb}{0.0,0.0,0.6}
\definecolor{ddkbu} {rgb}{0.0,0.0,0.45}
\usepackage{ifthen} % fuer 'ifthenelse{}{}{}'
\usepackage{ifpdf} % fuer {\ifpdf ... \fi}
\usepackage{beramono} % monospace font -MR
\usepackage{listings}
\lstdefinestyle{default}{
columns=space-flexible,
basicstyle=\fontsize{9pt}{9pt}\selectfont\ttfamily,
frame=single,
frameround=tttt,
showstringspaces=false,
breaklines=true,
tabsize=4,
numbers=left,
captionpos=b
}
\lstdefinestyle{terminal}{
style=default,
language=bash,
frame=none,
numbers=none,
backgroundcolor=\color{ltgy}
}
\lstdefinelanguage{customvhdl}[]{VHDL}{
morekeywords=[2]{std_logic, std_logic_vector, natural, integer, bit, string},
}
\lstdefinestyle{vhdlstyle}{
language=customvhdl,
belowcaptionskip=1\baselineskip,
keywordstyle=\bfseries\color{green!40!black},
keywordstyle=[2]\bfseries\color{blue!80!white},
commentstyle=\itshape\color{purple},
backgroundcolor=\color{lightgray!20},
stringstyle=\color{orange},
xleftmargin=\parindent,
title=\lstname,
}
\lstset{
style=default,
literate={ö}{{\"o}}1
{ä}{{\"a}}1
{ü}{{\"u}}1
{Ö}{{\"O}}1
{Ä}{{\"A}}1
{Ü}{{\"U}}1
}
%% fix minus sign conflict with listings and breqn
\mathchardef\hyphenmathcode=\mathcode`\-
\let\origlstlisting=\lstlisting
\let\endoriglstlisting=\endlstlisting
\renewenvironment{lstlisting}
{\mathcode`\-=\hyphenmathcode
\everymath{}\mathsurround=0pt\origlstlisting}
{\endoriglstlisting}
\usepackage{fancyhdr}
%\usepackage{framed} %'\begin{framed}' ... '\end{framed}', schautAusWiePartezettel:-)
\usepackage{hyphenat} %fuer '\hyph{}'
\usepackage{lastpage} %fuer '\pageref{LastPage}' - **funzt nid bei allen**
\usepackage[hyphens]{url} %fuer '\url{...}'
% lscape oder pdflscape: ('landscape' == Querformat)
\usepackage{lscape}
%\usepackage{pdflscape}
\usepackage{rotating} %f. 'rotate' und 'turn'
\usepackage[active]{pst-pdf}
\usepackage{pst-circ}
\usepackage{pst-plot}
\usepackage{pst-uml}
%\usepackage{calc}
\usepackage{fp}
%\usepackage[official]{eurosym}
\usepackage[gen]{eurosym}
% YHs Raender links 30mm rechts 25mm einstellen:
\setlength{\hoffset} {30mm-1in}
\setlength{\oddsidemargin}{0pt} %bei doppelseitigem Druck umstellen!
\setlength{\textwidth} {\paperwidth-55mm}
\setlength{\topmargin} {0pt}
\addtolength{\voffset} {-16.2mm}
\addtolength{\textheight}{39mm}
%\setcounter{tocdepth}{4} %bringt auch 'paragraph{titel}' ins Inhaltsverzeichnis
%
\definecolor{ydkbu}{rgb}{0.0,0.0,0.6} % YHs blaue Schriftfarb
\newcommand{\yhbu}[0]{\color{ydkbu}} % Macro fuer schreibfaulen XH
%\newcommand{\yhbu}[0]{\color{ydkbu}\usefont{T1}{laess}{m}{n}} % Macro fuer schreibfaulen XH
\definecolor{corrclr}{rgb}{0.7,0.2,0.2} % XHs Korrekturen-Farb ...
\newcommand{\korr}[0]{\color{corrclr}\fontsize{8pt}{9pt}\selectfont\bf} %plus Faulheitsmacro
\makeindex
%%% BibLaTeX settings
\usepackage[citestyle = ieee]{biblatex}
\usepackage{csquotes}
\addbibresource{./bibliographies/DP.bib}
\addbibresource{./bibliographies/AB.bib}
\DeclareNameAlias{sortname}{family-given}
\renewcommand\multinamedelim{;\ }
\renewcommand\finalnamedelim{;\ }
\renewcommand\intitlepunct{:\ }
\renewcommand\labelnamepunct{:\ }
\DeclareFieldFormat{title}{#1} %title not italic
%\bibnamedash
%\renewcommand\newunitpunct{OWO}
\usepackage{float} % Allows the H floating option
\usepackage{tabularx} % Allows the H floating option
\usepackage[headheight=0mm, margin=2.5cm]{geometry}
%%% MR-packages:
\usepackage{tikz,pgfplots}
\usetikzlibrary{plotmarks}
\usetikzlibrary{angles,quotes,babel,shapes,arrows,positioning,calc,automata}
\usepackage{tikz-timing}
\tikzset{
block/.style = {draw, fill=white, rectangle, minimum height=3em, minimum width=3em,align=center},
tmp/.style = {coordinate},
sum/.style= {draw, fill=white, circle, node distance=1cm},
input/.style = {coordinate},
output/.style= {coordinate},
pinstyle/.style = {pin edge={to-,thin,black}
}
}
% https://www.overleaf.com/learn/latex/LaTeX_Graphics_using_TikZ:_A_Tutorial_for_Beginners_(Part_3)%E2%80%94Creating_Flowcharts
\tikzstyle{startstop} = [rectangle, rounded corners, minimum width=3cm, minimum
height=1cm,align=center, text width=3cm, draw=black, fill=red!30]
\tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm,
minimum height=1cm, align=center, text width=3cm, draw=black, fill=blue!30]
\tikzstyle{process} = [rectangle, minimum width=3cm, minimum height=1cm, align=center, text width=3cm, draw=black, fill=orange!30]
\tikzstyle{decision} = [diamond, minimum width=3cm, minimum height=1cm, align=center, text width=3cm, draw=black, fill=green!30]
\tikzstyle{arrow} = [thick,->,>=latex]
\usetikzlibrary{external}
\usepackage[european, straightvoltages]{circuitikz}
\usepackage[per-mode=fraction]{siunitx}
\usepackage{breqn}
\usepackage{physics}
\usepackage{caption}
\usepackage{slashed}
\input kvmacros
\usepackage{mdframed}
\usepackage{lipsum}
\usepackage{blindtext}
\usepackage{pgfgantt}
\tikzset{->, % makes the edges directed
>=stealth, % makes the arrow heads bold
node distance=6cm, % specifies the minimum distance between two nodes. Change if necessary.
every state/.style={thick, fill=gray!10}, % sets the properties for each state node
initial text=$ $} % sets the text that appears on the start arrow
\usepackage{subcaption}
%%% Title formatting
\usepackage{titlesec}
\titleformat{\section}{\normalfont\bfseries\scshape\fontsize{16pt}{19pt}\selectfont}{\thesection}{1em}{}
%%% ToC formatting
\usepackage{tocloft}
\renewcommand{\cftloftitlefont}{\section}
\renewcommand{\cftlottitlefont}{\section}
\renewcommand{\cftsecfont}{}
\renewcommand\cftsubsecdotsep{.2}
\renewcommand{\cftsecleader}{\cftdotfill{\cftsubsecdotsep}}
\setlength\cftbeforesecskip{3.84pt}
\setlength\cftsubsecindent{4.2mm}
% command for regular footer in ToC
\fancypagestyle{plain}{%
\fancyhf{}
\fancyhead[L]{\HtlHeader}
\fancyfoot[L]{Brauns, Plank}
\fancyfoot[R]{\thepage}
\setlength{\headwidth}{1.0\textwidth}
\setlength{\headheight}{12mm}
\renewcommand{\headrulewidth}{0.0pt}
\renewcommand{\footrulewidth}{0.33pt}
}
% make listoflistings its own section
\usepackage{tocbasic}
\addtotoclist[float]{lol}
\renewcommand*\lstlistoflistings{\listoftoc[{\lstlistlistingname}]{lol}}
\DeclareTOCStyleEntry[
level=1,
indent=1.5em,
numwidth=2.3em
]{default}{listing}
\doforeachtocfile[float]{%
\setuptoc{#1}{numbered}%
}
%/* Xh Macros: */
\newcommand{\cmnt}[1]{} %eigene Kommentier-Funktion \cmnt{ ...Kommentar... }
\newcommand\tbs{\textbackslash} %'\textbackslash{}' isma z'long zan tippen ;-)
\newcommand{\xilist}[6]{ %XHs eigenes Auflistungs-Format
\noindent\\[#3mm]\protect\begin{list}{#1}{\setlength\topsep{-4mm}%
\setlength\partopsep{-1.0mm}\setlength\itemsep{#4mm}\setlength\leftmargin{#2mm}%
\setlength\itemindent{-0.0mm}\setlength{\baselineskip}{0.9\baselineskip} }%
#6%
\protect\end{list}\hfill\\[#5mm]%
}
%/* Line Spacing: */
\usepackage{setspace}
% \newcommand{\mylinespacing}[0]{\singlespace} % 1,0-ZeilenAbstand
\newcommand{\mylinespacing}[0]{\onehalfspace} % 1,5-ZeilenAbstand
% \newcommand{\mylinespacing}[0]{\doublespace} % 2,0-ZeilenAbstand
%/* serifenlose Schrift-Grundeinstellung: */
% /*Font Family:*/
%\renewcommand*{\familydefault}{\rmdefault} %klassisches 'Roman' (statt MicroMurx...)
\renewcommand*{\familydefault}{\sfdefault} %klassisches 'Helvetica' statt 'Murx-Arial'
%%% Autoren:
\newcommand\AB{\lfoot{Armin Brauns}}
\newcommand\DP{\lfoot{Daniel Plank}}
\newcommand\allAuth{\lfoot{Brauns, Plank}}
\newcommand\TikZ{Ti\textit{k}Z}
\usepackage{booktabs}
\usepackage[title,toc,titletoc,page]{appendix}
\newcommand{\HtlHeader}[0]{%
%\hspace*{-11mm}%
%\raisebox{-1mm}{\logoB{0.12}}%
{
\includesvg[width=10.3mm]{pics/logoBpdf.svg}
}
\hspace*{2mm}%
\parbox[b]{110mm}{\flushleft
{\fontsize{20pt}{20pt}\selectfont\bf HTL}
{\fontsize{16.2pt}{16.2pt}\selectfont\color{teal}\bf Anichstra\ss e}
\\[-4.05mm]{\color{darkgray}\rule{110mm}{0.5pt}}
\\[-2.24mm]{\fontsize{7pt}{7pt}\selectfont\color{darkgray}
Biomedizin $\cdot$ Elektronik $\cdot$ Elektrotechnik
$\cdot$
Maschinenbau $\cdot$ Wirtschaftsingenieure
\rule{0pt}{0mm}
%\vspace*{1.1mm}
}
}%
\hspace*{5mm}%
\raisebox{-0.2mm}{ \includegraphics[width=25mm]{pics/HTLgenlogo02}}
\\[-1.5mm]\rule{\textwidth}{0.5pt}
%\hfill
}%HtlHeader
\lstnewenvironment{bash}
{\lstset{numbers=left,language=bash,keywordstyle={\color{blue}}}}
{}
\definecolor{backcolour}{rgb}{0.95,0.95,0.92}
\definecolor{codegray}{rgb}{0.5,0.5,0.5}
\definecolor{background}{HTML}{EEEEEE}
\definecolor{delim}{RGB}{20,105,176}
\colorlet{numb}{magenta!60!black}
\colorlet{punct}{red!60!black}
\lstdefinestyle{cstyle}{
backgroundcolor=\color{backcolour},
commentstyle=\color{green},
keywordstyle=\color{red},
numberstyle=\tiny\color{codegray},
stringstyle=\color{purple},
basicstyle=\ttfamily\footnotesize,
breakatwhitespace=false,
breaklines=true,
captionpos=b,
keepspaces=true,
numbers=left,
columns=fixed,
showspaces=false,
showstringspaces=false,
showtabs=false,
tabsize=4
}
\lstdefinelanguage{json}{
basicstyle=\normalfont\ttfamily,
numbers=left,
numberstyle=\scriptsize,
stepnumber=1,
numbersep=8pt,
showstringspaces=false,
breaklines=true,
frame=lines,
backgroundcolor=\color{background},
literate=
*{0}{{{\color{numb}0}}}{1}
{1}{{{\color{numb}1}}}{1}
{2}{{{\color{numb}2}}}{1}
{3}{{{\color{numb}3}}}{1}
{4}{{{\color{numb}4}}}{1}
{5}{{{\color{numb}5}}}{1}
{6}{{{\color{numb}6}}}{1}
{7}{{{\color{numb}7}}}{1}
{8}{{{\color{numb}8}}}{1}
{9}{{{\color{numb}9}}}{1}
{:}{{{\color{punct}{:}}}}{1}
{,}{{{\color{punct}{,}}}}{1}
{\{}{{{\color{delim}{\{}}}}{1}
{\}}{{{\color{delim}{\}}}}}{1}
{[}{{{\color{delim}{[}}}}{1}
{]}{{{\color{delim}{]}}}}{1},
}
\lstdefinelanguage{bash}{
basicstyle=\normalfont\ttfamily,
numbers=left,
numberstyle=\scriptsize,
stepnumber=1,
numbersep=8pt,
showstringspaces=false,
breaklines=true,
frame=lines,
backgroundcolor=\color{background},
literate=
*{0}{{{\color{numb}0}}}{1}
{1}{{{\color{numb}1}}}{1}
{2}{{{\color{numb}2}}}{1}
{3}{{{\color{numb}3}}}{1}
{4}{{{\color{numb}4}}}{1}
{5}{{{\color{numb}5}}}{1}
{6}{{{\color{numb}6}}}{1}
{7}{{{\color{numb}7}}}{1}
{8}{{{\color{numb}8}}}{1}
{9}{{{\color{numb}9}}}{1}
{:}{{{\color{punct}{:}}}}{1}
{,}{{{\color{punct}{,}}}}{1}
{\{}{{{\color{delim}{\{}}}}{1}
{\}}{{{\color{delim}{\}}}}}{1}
{[}{{{\color{delim}{[}}}}{1}
{]}{{{\color{delim}{]}}}}{1},
}
\usepackage{booktabs}
\usepgfplotslibrary{external}
\tikzexternalize
\usepackage{titling}
\usepackage{datetime}
\yyyymmdddate
\renewcommand{\dateseparator}{-}
\setlength{\parindent}{0pt}
\setlength{\parskip}{1em}
\usepackage{footnote}
\newcommand\instrset{rv32i}
\newcommand{\entityheader}[1]{
\lstinputlisting[
style=vhdlstyle,
label={lst:entity-header-#1},
caption={Header for #1 entity},
title=\texttt{#1.vhd},
]{entities/#1_entity.vhd}
}
\usepackage{tcolorbox}
\newtcbox{\codeBox}[1][gray]{
on line,
arc=2pt,
colback=black!5,
colupper=black!80,
colframe=black!20,
before upper={
\rule[-3pt]{0pt}{10pt}
},
boxrule=1pt,
boxsep=0pt,
left=3pt,
right=3pt,
top=2pt,
bottom=0pt
}
\newcommand{\icode}[1]{\codeBox{\texttt{#1}}}
% Make sure it comes *last* of your loaded packages, to give it a fighting
% chance of not being over-written, since its job is to redefine many LATEX
% commands. http://mirrors.ctan.org/macros/latex/contrib/hyperref/doc/manual.pdf
\usepackage[
pdfauthor={Daniel Plank, Armin Brauns},
pdftitle=YARM,
pdfproducer=5ABHEL,
bookmarks=true,
pdfcreator=xelatex,
]{hyperref}
\sloppy