first test

This commit is contained in:
robelix 2018-01-14 20:27:20 +01:00
parent 387293af91
commit 9dceb4a7f8
2 changed files with 91 additions and 4 deletions

View File

@ -8,6 +8,9 @@
; Please visit documentation for the other options and examples
; http://docs.platformio.org/page/projectconf.html
[platformio]
env_default = leonardo
[env:attiny2313]
platform = atmelavr
board = attiny2313
@ -18,4 +21,9 @@ upload_protocol = stk500v1
upload_flags = -P$UPLOAD_PORT -b$UPLOAD_SPEED
; values
upload_port = /dev/ttyUSB0
upload_speed = 19200
upload_speed = 19200
[env:leonardo]
platform = atmelavr
board = leonardo
framework = arduino

View File

@ -1,9 +1,88 @@
#include <Arduino.h>
/*
for cheap Chinese 64 dots LED-Projector
Board has unmarked chip in socket - pin layout fits to ATTiny 2313 an 4313
the LEDS are connected to 8 pcs 74HC595
--u--
RST 1 20 VCC
NC (0) 2 19 (16) IN SCK
NC (1) 3 18 (15) IN MISO
XTAL 4 17 (14) IN MOSI
XTAL 5 16 (13) IN
OUT (4) 6 15 (12) IN
OUT (5) 7 14 (11) IN
OUT (6) 8 13 (10) IN
NC (7) 9 12 (9) MIC
GND 10 11 (8) IN
-----
() = Arduino Pins
RST = Reset - 10K to GND, 10uF to VCC
XTAL = 16 MHz Crystal
IN = switches
MIC = Input from microphone amplifier (LM358)
*/
#define LATCHPIN 6
#define DATAPIN 4
#define CLOCKPIN 5
byte ledsData[8];
byte currentled = 0;
void clear() {
for (int i=0; i < 8; i++) {
// low is led on
ledsData[i] = 255;
}
}
void writebuffer(byte ledNr) {
byte chipNr = ledNr / 8;
byte pinNr = ledNr % 8;
if(chipNr < 8) {
bitWrite(ledsData[chipNr], pinNr, LOW);
}
}
void writexy(byte x, byte y) {
byte lednr = x*8 + y;
writebuffer(lednr);
}
void pushout() {
digitalWrite(LATCHPIN, LOW);
for(int i = 8-1; i>=0; i--) {
shiftOut(DATAPIN, CLOCKPIN, MSBFIRST, ledsData[i]);
}
digitalWrite(LATCHPIN, HIGH);
}
void setup() {
// put your setup code here, to run once:
pinMode(LATCHPIN, OUTPUT);
pinMode(DATAPIN, OUTPUT);
pinMode(CLOCKPIN, OUTPUT);
clear();
pushout();
}
void loop() {
// put your main code here, to run repeatedly:
}
clear();
writebuffer(currentled);
pushout();
currentled++;
if (currentled >=64) {
currentled = 0;
}
delay(100);
}