diff --git a/pkg/init/build b/pkg/init/build
new file mode 100755
index 0000000..ec2d193
--- /dev/null
+++ b/pkg/init/build
@@ -0,0 +1,46 @@
+VERSION="0.1"
+SRCDIR="init-${VERSION}"
+TARBALL="${SRCDIR}.tar.gz"
+URL="http://infraroot.at/pygos"
+SHA256SUM="56fb57c7cc1b869642028497f81ea20f42d17821cd60af3d3b6a58170123f750"
+DEPENDS="toolchain"
+
+prepare() {
+	return
+}
+
+build() {
+	local SOURCE="$1"
+	local DEPLOY="$2"
+
+	$SOURCE/configure --prefix="" --host="$TARGET" --sbindir=/bin
+
+	make -j $NUMJOBS
+}
+
+deploy() {
+	local SOURCE="$1"
+	local DEPLOY="$2"
+	local svc
+
+	make DESTDIR="$DEPLOY" install-strip
+
+	mkdir -p "$DEPLOY/etc/init.d"
+
+	if [ -e "$SCRIPTDIR/board/$BOARD/INIT" ]; then
+		source "$SCRIPTDIR/board/$BOARD/INIT"
+	fi
+	if [ -e "$SCRIPTDIR/product/$PRODUCT/INIT" ]; then
+		source "$SCRIPTDIR/product/$PRODUCT/INIT"
+	fi
+
+	for svc in hostname loopback sysctl hwclock sysinit; do
+		ln -s "/share/init/$svc" "$DEPLOY/etc/init.d/$svc"
+	done
+
+	for svc in $GETTY_TTY; do
+		ln -s "/share/init/agetty" "$DEPLOY/etc/init.d/agetty@$svc"
+	done
+
+	unset -v i GETTY_TTY
+}
diff --git a/pkg/initrd/initrd.skel b/pkg/initrd/initrd.skel
index 77252bc..8b1a298 100644
--- a/pkg/initrd/initrd.skel
+++ b/pkg/initrd/initrd.skel
@@ -160,8 +160,10 @@ umount -l /dev
 umount /sys
 umount /proc
 
+if [ "$singleuser" == "1" ]; then
+	unset -v singleuser overlay_dev root root_sfs
+	exec /bin/busybox switch_root /newroot /bin/bash
+fi
+
 unset -v singleuser overlay_dev root root_sfs
-
-/bin/busybox chroot /newroot /bin/openrc
-
-exec /bin/busybox switch_root /newroot /bin/openrc-init
+exec /bin/busybox switch_root /newroot /bin/init
diff --git a/pkg/openrc/0001.patch b/pkg/openrc/0001.patch
deleted file mode 100644
index a5ad101..0000000
--- a/pkg/openrc/0001.patch
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/src/rc/openrc-init.c
-+++ b/src/rc/openrc-init.c
-@@ -53,7 +53,7 @@ static pid_t do_openrc(const char *runlevel)
- 			sigemptyset(&signals);
- 			sigprocmask(SIG_SETMASK, &signals, NULL);
- 			printf("Starting %s runlevel\n", runlevel);
--			execl("/sbin/openrc", "/sbin/openrc", runlevel, NULL);
-+			execl("/bin/openrc", "/bin/openrc", runlevel, NULL);
- 			perror("exec");
- 			break;
- 		default:
---- a/src/rc/rc-selinux.c
-+++ b/src/rc/rc-selinux.c
-@@ -400,8 +400,8 @@ void selinux_setup(char **argv)
- 	 * which will open the pty with initrc_devpts_t, if it doesnt exist,
- 	 * fall back to plain exec
- 	 */
--	if (!access("/usr/sbin/open_init_pty", X_OK)) {
--		if (execvp("/usr/sbin/open_init_pty", argv)) {
-+	if (!access("/bin/open_init_pty", X_OK)) {
-+		if (execvp("/bin/open_init_pty", argv)) {
- 			perror("execvp");
- 			exit(-1);
- 		}
---- a/src/rc/rc.c
-+++ b/src/rc/rc.c
-@@ -78,8 +78,8 @@ const char *usagestring = ""					\
- #define INITSH                  RC_LIBEXECDIR "/sh/init.sh"
- #define INITEARLYSH             RC_LIBEXECDIR "/sh/init-early.sh"
- 
--#define SHUTDOWN                "/sbin/shutdown"
--#define SULOGIN                 "/sbin/sulogin"
-+#define SHUTDOWN                "/bin/shutdown"
-+#define SULOGIN                 "/bin/sulogin"
- 
- #define INTERACTIVE             RC_SVCDIR "/interactive"
- 
-@@ -288,8 +288,8 @@ open_shell(void)
- 	/* VSERVER systems cannot really drop to shells */
- 	if (sys && strcmp(sys, RC_SYS_VSERVER) == 0)
- 	{
--		execl("/sbin/halt", "/sbin/halt", "-f", (char *) NULL);
--		eerrorx("%s: unable to exec `/sbin/halt': %s",
-+		execl("/bin/halt", "/bin/halt", "-f", (char *) NULL);
-+		eerrorx("%s: unable to exec `/bin/halt': %s",
- 		    applet, strerror(errno));
- 	}
- #endif
diff --git a/pkg/openrc/build b/pkg/openrc/build
deleted file mode 100755
index b764576..0000000
--- a/pkg/openrc/build
+++ /dev/null
@@ -1,74 +0,0 @@
-VERSION="0.34.11"
-SRCDIR="openrc-${VERSION}"
-TARBALL="${VERSION}.tar.gz"
-URL="https://github.com/OpenRC/openrc/archive"
-SHA256SUM="4e7b7510c363e99622400feba4b009ec0e0b57dbb99fd4cc678a7b5d2036e00a"
-DEPENDS="ncurses"
-
-prepare() {
-	return
-}
-
-build() {
-	local SOURCE="$1"
-	local DEPLOY="$2"
-
-	local distroname="${OS_NAME}-${OS_RELEASE}"
-
-	cp -R ${SOURCE}/* ${PKGBUILDDIR}
-
-	apply_patches
-
-	make CC=${TARGET}-gcc AR=${TARGET}-ar RANLIB=${TARGET}-ranlib \
-		LD=${TARGET}-ld LIBTERMCAP="-lncursesw" \
-		SBINDIR="/bin" INCDIR="/include" LIBNAME="lib" \
-		DESTDIR="$DEPLOY" OS=Linux BRANDING="$distroname" \
-		MKNET=no MKSELINUX=no MKSTATICLIBS=no MKSYSVINIT=yes \
-		MKTERMCAP=ncurses UPREFIX="" \
-		-j $NUMJOBS
-}
-
-deploy() {
-	local SOURCE="$1"
-	local DEPLOY="$2"
-	local DEVDEPLOY="$3"
-
-	local distroname="${OS_NAME}-${OS_RELEASE}"
-
-	make SBINDIR="/bin" INCDIR="/include" LIBNAME="lib" \
-		DESTDIR="$DEPLOY" OS=Linux BRANDING="$distroname" UPREFIX="" \
-		install
-
-	split_dev_deploy "$DEPLOY" "$DEVDEPLOY"
-
-	rm -r ${DEPLOY}/share
-	rm -r ${DEPLOY}/etc
-
-	chmod 755 ${DEPLOY}/lib/*.so*
-	strip_files ${DEPLOY}/{bin,lib}/* ${DEPLOY}/libexec/rc/{bin,sbin}/*
-
-	mkdir -p ${DEPLOY}/etc/{conf.d,init.d,runlevels,sysctl.d}
-	mkdir -p ${DEPLOY}/etc/runlevels/{boot,sysinit,shutdown,default}
-	cp -R "$SCRIPTDIR/pkg/$PKGNAME/etc" "$DEPLOY"
-
-	if [ -e "$SCRIPTDIR/board/$BOARD/INIT" ]; then
-		source "$SCRIPTDIR/board/$BOARD/INIT"
-	fi
-	if [ -e "$SCRIPTDIR/product/$PRODUCT/INIT" ]; then
-		source "$SCRIPTDIR/product/$PRODUCT/INIT"
-	fi
-
-	for i in $GETTY_TTY; do
-		cat > "$DEPLOY/etc/conf.d/agetty.$i" << _EOF
-#quiet="yes"
-#baud="38400"
-term_type="linux"
-#agetty_options=""
-_EOF
-
-		ln -s "/etc/init.d/agetty" "$DEPLOY/etc/init.d/agetty.$i"
-		ln -s "/etc/init.d/agetty.$i" "$DEPLOY/etc/runlevels/default/agetty.$i"
-	done
-
-	unset -v i GETTY_TTY
-}
diff --git a/pkg/openrc/etc/conf.d/hostname b/pkg/openrc/etc/conf.d/hostname
deleted file mode 100644
index ebdc8f1..0000000
--- a/pkg/openrc/etc/conf.d/hostname
+++ /dev/null
@@ -1,2 +0,0 @@
-# Set to the hostname of this machine
-hostname="localhost"
diff --git a/pkg/openrc/etc/conf.d/hwclock b/pkg/openrc/etc/conf.d/hwclock
deleted file mode 100644
index ce9b40a..0000000
--- a/pkg/openrc/etc/conf.d/hwclock
+++ /dev/null
@@ -1,20 +0,0 @@
-# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
-# Greenwich Mean Time).  If that clock is set to the local time, then
-# set CLOCK to "local".  Note that if you dual boot with Windows, then
-# you should set it to "local".
-clock="UTC"
-
-# If you want the hwclock script to set the system time (software clock)
-# to match the current hardware clock during bootup, leave this
-# commented out.
-# However, you can set this to "NO" if you are running a modern kernel
-# and using NTP to synchronize your system clock.
-#clock_hctosys="YES"
-
-# If you do not want to set the hardware clock to the current system
-# time (software clock) during shutdown, set this to no.
-#clock_systohc="YES"
-
-# If you wish to pass any other arguments to hwclock during bootup,
-# you may do so here. Alpha users may wish to use --arc or --srm here.
-clock_args=""
diff --git a/pkg/openrc/etc/conf.d/killprocs b/pkg/openrc/etc/conf.d/killprocs
deleted file mode 100644
index 76a2bc9..0000000
--- a/pkg/openrc/etc/conf.d/killprocs
+++ /dev/null
@@ -1,6 +0,0 @@
-# If you wish to pass any options to kill_all during shutdown,
-# you should do so here.
-#
-# The setting is called killall5_opts because the options here are meant
-# to be identical to those you could pass to killall5.
-killall5_opts=""
diff --git a/pkg/openrc/etc/conf.d/modules b/pkg/openrc/etc/conf.d/modules
deleted file mode 100644
index c35b9ed..0000000
--- a/pkg/openrc/etc/conf.d/modules
+++ /dev/null
@@ -1,27 +0,0 @@
-# Linux users can define a list of modules for a specific kernel version,
-# a released kernel version, a main kernel version or all kernel versions.
-# The most specific versioned variable will take precedence.
-# FreeBSD users can only use the modules="foo bar" setting.
-#modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
-#modules_2_6_23="tun ieee1394"
-#modules_2_6="tun"
-#modules_2="ipv6"
-#modules="ohci1394"
-
-# Linux users can give modules a different name when they load - the new name
-# will also be used to pick arguments below.
-# This is not supported on FreeBSD.
-#modules="dummy:dummy1"
-
-# Linux users can give the modules some arguments if needed, per version
-# if necessary.
-# Again, the most specific versioned variable will take precedence.
-# This is not supported on FreeBSD.
-#module_ieee1394_args="debug"
-#module_ieee1394_args_2_6_23_gentoo_r5="debug2"
-#module_ieee1394_args_2_6_23="debug3"
-#module_ieee1394_args_2_6="debug4"
-#module_ieee1394_args_2="debug5"
-
-# You should consult your kernel documentation and configuration
-# for a list of modules and their options.
diff --git a/pkg/openrc/etc/conf.d/urandom b/pkg/openrc/etc/conf.d/urandom
deleted file mode 100644
index f721a24..0000000
--- a/pkg/openrc/etc/conf.d/urandom
+++ /dev/null
@@ -1,5 +0,0 @@
-# Sometimes you want to have urandom start before "localmount"
-# (say for crypt swap), so you will need to customize this
-# behavior.  If you have /var on a separate partition, then
-# make sure this path lives on your root device somewhere.
-urandom_seed="/var/lib/misc/random-seed"
diff --git a/pkg/openrc/etc/init.d/agetty b/pkg/openrc/etc/init.d/agetty
deleted file mode 100755
index 98b44c5..0000000
--- a/pkg/openrc/etc/init.d/agetty
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/openrc-run
-# Copyright (c) 2017 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="start agetty on a terminal line"
-supervisor=supervise-daemon
-port="${RC_SVCNAME#*.}"
-term_type="${term_type:-linux}"
-command=/bin/agetty
-command_args_foreground="${agetty_options} ${port} ${baud} ${term_type}"
-pidfile="/run/${RC_SVCNAME}.pid"
-export EINFO_QUIET="${quiet:-yes}"
-
-depend() {
-	after local
-	keyword -prefix
-}
-
-start_pre() {
-	if [ -z "$port" ]; then
-		eerror "${RC_SVCNAME} cannot be started directly. You must create"
-		eerror "symbolic links to it for the ports you want to start"
-		eerror "agetty on and add those to the appropriate runlevels."
-		return 1
-	fi
-}
diff --git a/pkg/openrc/etc/init.d/functions.sh b/pkg/openrc/etc/init.d/functions.sh
deleted file mode 120000
index 974cf64..0000000
--- a/pkg/openrc/etc/init.d/functions.sh
+++ /dev/null
@@ -1 +0,0 @@
-/libexec/rc/sh/functions.sh
\ No newline at end of file
diff --git a/pkg/openrc/etc/init.d/hostname b/pkg/openrc/etc/init.d/hostname
deleted file mode 100755
index ecb01a6..0000000
--- a/pkg/openrc/etc/init.d/hostname
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Sets the hostname of the machine."
-
-depend()
-{
-	after clock
-	keyword -docker -lxc -prefix -systemd-nspawn
-}
-
-start()
-{
-	local h source x
-	if [ -s /etc/hostname ] && [ -r /etc/hostname ]; then
-		read h x </etc/hostname
-		source="from /etc/hostname"
-	else
-		# HOSTNAME variable used to be defined in caps in conf.d/hostname.
-		# It is also a magic variable in bash.
-		h=${hostname:-${HOSTNAME}} # checkbashisms: false positive (HOSTNAME var)
-	fi
-	if [ -z "$h" ]; then
-		einfo "Using default system hostname"
-		return 0
-	fi
-	ebegin "Setting hostname to $h $source"
-	hostname "$h"
-	eend $? "Failed to set the hostname"
-}
diff --git a/pkg/openrc/etc/init.d/hwclock b/pkg/openrc/etc/init.d/hwclock
deleted file mode 100755
index 742ae4c..0000000
--- a/pkg/openrc/etc/init.d/hwclock
+++ /dev/null
@@ -1,160 +0,0 @@
-#!/bin/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-extra_commands="save show"
-
-description="Sets the local clock to UTC or Local Time."
-description_save="Saves the current time in the BIOS."
-description_show="Displays the current time in the BIOS."
-
-: ${clock_adjfile:=${CLOCK_ADJFILE}}
-: ${clock_args:=${CLOCK_OPTS}}
-: ${clock_systohc:=${CLOCK_SYSTOHC}}
-: ${clock:=${CLOCK:-UTC}}
-if [ "$clock" = "UTC" ]; then
-	utc="UTC"
-	utc_cmd="--utc"
-else
-	utc="Local Time"
-	utc_cmd="--localtime"
-fi
-
-depend()
-{
-	provide clock
-	want modules
-	if yesno $clock_adjfile; then
-		use root
-	fi
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
-}
-
-setupopts()
-{
-	case "$(uname -m)" in
-		s390*)
-			utc="s390"
-			;;
-		*)
-			if [ -e /proc/devices ] && \
-				grep -q " cobd$" /proc/devices
-			then
-				utc="coLinux"
-			fi
-			;;
-	esac
-
-	case "$utc" in
-		UTC|Local" "Time);;
-		*) unset utc_cmd;;
-	esac
-}
-
-# hwclock doesn't always return non zero on error
-_hwclock()
-{
-	local err="$(hwclock "$@" 2>&1 >/dev/null)"
-
-	[ -z "$err" ] && return 0
-	echo "${err}" >&2
-	return 1
-}
-
-get_noadjfile()
-{
-	if ! yesno $clock_adjfile; then
-		# Some implementations don't handle adjustments
-		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
-			echo --noadjfile
-		fi
-	fi
-}
-
-rtc_exists()
-{
-	local rtc=
-	for rtc in /dev/rtc /dev/rtc[0-9]*; do
-		[ -e "$rtc" ] && break
-	done
-	[ -e "$rtc" ]
-}
-
-start()
-{
-	local retval=0 errstr="" modname
-	setupopts
-
-	if [ -z "$utc_cmd" ]; then
-		ewarn "Not setting clock for $utc system"
-		return 0
-	fi
-
-	ebegin "Setting system clock using the hardware clock [$utc]"
-	if [ -e /proc/modules ]; then
-		if ! rtc_exists; then
-			for x in rtc-cmos rtc genrtc; do
-				modprobe -q $x && rtc_exists && modname="$x" && break
-			done
-			[ -n "$modname" ] &&
-				ewarn "The $modname module needs to be configured in" \
-					"/etc/conf.d/modules or built in."
-		fi
-	fi
-
-	# Always set the kernel's time zone.
-	_hwclock --systz $utc_cmd $(get_noadjfile) $clock_args
-	: $(( retval += $? ))
-
-	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
-		_hwclock --adjust $utc_cmd $(get_noadjfile)
-		: $(( retval += $? ))
-	fi
-
-	if yesno ${clock_hctosys:-YES}; then
-		_hwclock --hctosys $utc_cmd $(get_noadjfile) $clock_args
-		: $(( retval += $? ))
-	fi
-
-	eend $retval "Failed to set the system clock"
-
-	return 0
-}
-
-stop()
-{
-	# Don't tweak the hardware clock on LiveCD halt.
-	[ -n "$CDBOOT" ] && return 0
-	yesno ${clock_systohc:-YES} || return 0
-
-	local retval=0 errstr=""
-	setupopts
-
-	[ -z "$utc_cmd" ] && return 0
-
-	ebegin "Setting hardware clock using the system clock" "[$utc]"
-
-	_hwclock --systohc $utc_cmd $(get_noadjfile) $clock_args
-	retval=$?
-
-	eend $retval "Failed to sync clocks"
-}
-
-save()
-{
-	clock_systohc=yes
-	stop
-}
-
-show()
-{
-	setupopts
-	hwclock --show "$utc_cmd" $(get_noadjfile) $clock_args
-}
diff --git a/pkg/openrc/etc/init.d/killprocs b/pkg/openrc/etc/init.d/killprocs
deleted file mode 100755
index f8f58d5..0000000
--- a/pkg/openrc/etc/init.d/killprocs
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Kill all processes so we can unmount disks cleanly."
-
-depend()
-{
-	keyword -prefix
-}
-
-start()
-{
-	ebegin "Terminating remaining processes"
-	kill_all 15 ${killall5_opts}
-	eend 0
-	ebegin "Killing remaining processes"
-	kill_all 9 ${killall5_opts}
-	eend 0
-}
diff --git a/pkg/openrc/etc/init.d/loopback b/pkg/openrc/etc/init.d/loopback
deleted file mode 100755
index 7665c0b..0000000
--- a/pkg/openrc/etc/init.d/loopback
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/bin/openrc-run
-# Copyright (c) 2013-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Configures the loopback interface."
-
-depend()
-{
-	after clock
-	keyword -jail -prefix -systemd-nspawn -vserver
-}
-
-start()
-{
-	if [ "$RC_UNAME" = Linux ]; then
-		ebegin "Bringing up network interface lo"
-		if command -v ip > /dev/null 2>&1; then
-			ip addr add 127.0.0.1/8 dev lo brd +
-			ip link set lo up
-		else
-			ifconfig lo 127.0.0.1 netmask 255.0.0.0
-		fi
-	else
-		ebegin "Bringing up network interface lo0"
-		ifconfig lo0 127.0.0.1 netmask 255.0.0.0
-	fi
-	eend $?
-}
diff --git a/pkg/openrc/etc/init.d/modules b/pkg/openrc/etc/init.d/modules
deleted file mode 100755
index 07fac0e..0000000
--- a/pkg/openrc/etc/init.d/modules
+++ /dev/null
@@ -1,70 +0,0 @@
-#!/bin/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Loads a user defined list of kernel modules."
-
-depend()
-{
-	use isapnp
-	want modules-load
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
-}
-
-start()
-{
-	# Should not fail if kernel does not have module
-	# support compiled in ...
-	[ ! -f /proc/modules ] && return 0
-
-	local KV x y kv_variant_list
-	KV=$(uname -r)
-	# full $KV
-	kv_variant_list="${KV}"
-	# remove any KV_EXTRA options to just get the full version
-	x=${KV%%-*}
-	# now slowly strip them
-	while [ -n "$x" ] && [ "$x" != "$y" ]; do
-		kv_variant_list="${kv_variant_list} $x"
-		y=$x
-		x=${x%.*}
-	done
-
-	local list= x= xx= y= args= mpargs= a=
-	for x in $kv_variant_list ; do
-		eval list=\$modules_$(shell_var "$x")
-		[ -n "$list" ] && break
-	done
-	[ -z "$list" ] && list=$modules
-
-	[ -n "$list" ] && ebegin "Loading kernel modules"
-	for x in $list; do
-		a=${x#*:}
-		if [ "$a" = "$x" ]; then
-			unset mpargs
-		else
-			x=${x%%:*}
-			mpargs="-o $a"
-		fi
-		aa=$(shell_var "$a")
-		xx=$(shell_var "$x")
-		for y in $kv_variant_list ; do
-			eval args=\$module_${aa}_args_$(shell_var "$y")
-			[ -n "${args}" ] && break
-			eval args=\$module_${xx}_args_$(shell_var "$y")
-			[ -n "${args}" ] && break
-		done
-		[ -z "$args" ] && eval args=\$module_${aa}_args
-		[ -z "$args" ] && eval args=\$module_${xx}_args
-		eval modprobe --use-blacklist --verbose "$mpargs" "$x" "$args"
-	done
-	[ -n "$list" ] && eend
-	return 0
-}
diff --git a/pkg/openrc/etc/init.d/mount-ro b/pkg/openrc/etc/init.d/mount-ro
deleted file mode 100755
index 6e2edd6..0000000
--- a/pkg/openrc/etc/init.d/mount-ro
+++ /dev/null
@@ -1,59 +0,0 @@
-#!/bin/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Re-mount filesytems read-only for a clean reboot."
-
-depend()
-{
-	after killprocs
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
-}
-
-start()
-{
-	local ret=0
-
-	# Flush all pending disk writes now
-	sync
-
-	ebegin "Remounting remaining filesystems read-only"
-	# We need the do_unmount function
-	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
-	eindent
-
-	# Bug 381783
-	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
-
-	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|/run|${rc_svcdir}" x= fs=
-	m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
-	if [ -e "$rc_svcdir"/usr_premounted ]; then
-		m="$m|/usr"
-	fi
-	# RC_NO_UMOUNTS is an env var that can be set by plugins
-	local IFS="$IFS:"
-	for x in $no_umounts $RC_NO_UMOUNTS; do
-		m="$m|$x"
-	done
-	m="^($m)$"
-	fs=
-	for x in $net_fs_list $extra_net_fs_list; do
-		fs="$fs${fs:+|}$x"
-	done
-	[ -n "$fs" ] && fs="^($fs)$"
-	do_unmount "umount -r" \
-		--skip-point-regex "$m" \
-		"${fs:+--skip-fstype-regex}" $fs --nonetdev
-	ret=$?
-
-	eoutdent
-
-	eend $ret
-}
diff --git a/pkg/openrc/etc/init.d/sysctl b/pkg/openrc/etc/init.d/sysctl
deleted file mode 100755
index 0b990d6..0000000
--- a/pkg/openrc/etc/init.d/sysctl
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/bin/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-depend()
-{
-	after clock
-	before bootmisc logger
-	keyword -prefix -systemd-nspawn -vserver
-}
-
-start()
-{
-	ebegin "Configuring kernel parameters"
-	sysctl --system
-	eend $? "Unable to configure some kernel parameters"
-}
diff --git a/pkg/openrc/etc/init.d/termencoding b/pkg/openrc/etc/init.d/termencoding
deleted file mode 100755
index 544bb42..0000000
--- a/pkg/openrc/etc/init.d/termencoding
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/bin/openrc-run
-# Copyright (c) 2008-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Configures terminal encoding."
-
-ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
-: ${unicode:=${UNICODE}}
-
-depend()
-{
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
-	use root
-	after bootmisc clock
-}
-
-start()
-{
-	local ttydev=/dev/tty n=
-	[ -d /dev/vc ] && ttydev=/dev/vc/
-
-	# Set terminal encoding to either ASCII or UNICODE.
-	# See utf-8(7) for more information.
-	local termencoding="%@" termmsg="ASCII"
-	if yesno ${unicode}; then
-		termencoding="%G"
-		termmsg="UTF-8"
-	fi
-
-	ebegin "Setting terminal encoding [$termmsg]"
-	n=1
-	while [ ${n} -le "$ttyn" ]; do
-		printf "\033%s" "$termencoding" >$ttydev$n
-		: $(( n += 1 ))
-	done
-
-	# Save the encoding for use immediately at boot
-	if checkpath -W "$RC_LIBEXECDIR"; then
-		mkdir -p "$RC_LIBEXECDIR"/console
-		if yesno ${unicode:-${UNICODE}}; then
-			echo "" > "$RC_LIBEXECDIR"/console/unicode
-		else
-			rm -f "$RC_LIBEXECDIR"/console/unicode
-		fi
-	fi
-
-	eend 0
-}
diff --git a/pkg/openrc/etc/init.d/urandom b/pkg/openrc/etc/init.d/urandom
deleted file mode 100755
index d6f93f8..0000000
--- a/pkg/openrc/etc/init.d/urandom
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-: ${urandom_seed:=${URANDOM_SEED:-/var/lib/misc/random-seed}}
-description="Initializes the random number generator."
-
-depend()
-{
-	after clock
-	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn
-}
-
-save_seed()
-{
-	local psz=1
-
-	if [ -e /proc/sys/kernel/random/poolsize ]; then
-		: $(( psz = $(cat /proc/sys/kernel/random/poolsize) / 4096 ))
-	fi
-
-	(	# sub shell to prevent umask pollution
-		umask 077
-		dd if=/dev/urandom of="$urandom_seed" count=${psz} 2>/dev/null
-	)
-}
-
-start()
-{
-	[ -c /dev/urandom ] || return
-	if [ -f "$urandom_seed" ]; then
-		ebegin "Initializing random number generator"
-		cat "$urandom_seed" > /dev/urandom
-		eend $? "Error initializing random number generator"
-	fi
-	rm -f "$urandom_seed" && save_seed
-	return 0
-}
-
-stop()
-{
-	ebegin "Saving random seed"
-	save_seed
-	eend $? "Failed to save random seed"
-}
diff --git a/pkg/openrc/etc/rc.conf b/pkg/openrc/etc/rc.conf
deleted file mode 100644
index b7296d3..0000000
--- a/pkg/openrc/etc/rc.conf
+++ /dev/null
@@ -1,309 +0,0 @@
-# Global OpenRC configuration settings
-
-# Set to "YES" if you want the rc system to try and start services
-# in parallel for a slight speed improvement. When running in parallel we
-# prefix the service output with its name as the output will get
-# jumbled up.
-# WARNING: whilst we have improved parallel, it can still potentially lock
-# the boot process. Don't file bugs about this unless you can supply
-# patches that fix it without breaking other things!
-#rc_parallel="NO"
-
-# Set rc_interactive to "YES" and you'll be able to press the I key during
-# boot so you can choose to start specific services. Set to "NO" to disable
-# this feature. This feature is automatically disabled if rc_parallel is
-# set to YES.
-#rc_interactive="YES"
-
-# If we need to drop to a shell, you can specify it here.
-# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
-# otherwise /bin/sh
-# Linux users could specify /sbin/sulogin
-#rc_shell=/bin/sh
-
-# Do we allow any started service in the runlevel to satisfy the dependency
-# or do we want all of them regardless of state? For example, if net.eth0
-# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
-# both will be started, but services that depend on 'net' will work if either
-# one comes up. With rc_depend_strict="YES" we would require them both to
-# come up.
-#rc_depend_strict="YES"
-
-# rc_hotplug controls which services we allow to be hotplugged.
-# A hotplugged service is one started by a dynamic dev manager when a matching
-# hardware device is found.
-# Hotplugged services appear in the "hotplugged" runlevel.
-# If rc_hotplug is set to any value, we compare the name of this service
-# to every pattern in the value, from left to right, and we allow the
-# service to be hotplugged if it matches a pattern, or if it matches no
-# patterns. Patterns can include shell wildcards.
-# To disable services from being hotplugged, prefix patterns with "!".
-#If rc_hotplug is not set or is empty, all hotplugging is disabled.
-# Example - rc_hotplug="net.wlan !net.*"
-# This allows net.wlan and any service not matching net.* to be hotplugged.
-# Example - rc_hotplug="!net.*"
-# This allows services that do not match "net.*" to be hotplugged.
-
-# rc_logger launches a logging daemon to log the entire rc process to
-# /var/log/rc.log
-# NOTE: Linux systems require the devfs service to be started before
-# logging can take place and as such cannot log the sysinit runlevel.
-#rc_logger="NO"
-
-# Through rc_log_path you can specify a custom log file.
-# The default value is: /var/log/rc.log
-#rc_log_path="/var/log/rc.log"
-
-# If you want verbose output for OpenRC, set this to yes. If you want
-# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
-#rc_verbose=no
-
-# By default we filter the environment for our running scripts. To allow other
-# variables through, add them here. Use a * to allow all variables through.
-#rc_env_allow="VAR1 VAR2"
-
-# By default we assume that all daemons will start correctly.
-# However, some do not - a classic example is that they fork and return 0 AND
-# then child barfs on a configuration error. Or the daemon has a bug and the
-# child crashes. You can set the number of milliseconds start-stop-daemon
-# waits to check that the daemon is still running after starting here.
-# The default is 0 - no checking.
-#rc_start_wait=100
-
-# rc_nostop is a list of services which will not stop when changing runlevels.
-# This still allows the service itself to be stopped when called directly.
-#rc_nostop=""
-
-# rc will attempt to start crashed services by default.
-# However, it will not stop them by default as that could bring down other
-# critical services.
-#rc_crashed_stop=NO
-#rc_crashed_start=YES
-
-# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
-# output.
-#rc_nocolor=NO
-
-##############################################################################
-# MISC CONFIGURATION VARIABLES
-# There variables are shared between many init scripts
-
-# Set unicode to YES to turn on unicode support for keyboards and screens.
-#unicode="NO"
-
-# This is how long fuser should wait for a remote server to respond. The
-# default is 60 seconds, but  it can be adjusted here.
-#rc_fuser_timeout=60
-
-# Below is the default list of network fstypes.
-#
-# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
-# nfs nfs4 ocfs2 shfs smbfs
-#
-# If you would like to add to this list, you can do so by adding your
-# own fstypes to the following variable.
-#extra_net_fs_list=""
-
-##############################################################################
-# SERVICE CONFIGURATION VARIABLES
-# These variables are documented here, but should be configured in
-# /etc/conf.d/foo for service foo and NOT enabled here unless you
-# really want them to work on a global basis.
-# If your service has characters in its name which are not legal in
-# shell variable names and you configure the variables for it in this
-# file, those characters should be replaced with underscores in the
-# variable names as shown below.
-
-# Some daemons are started and stopped via start-stop-daemon.
-# We can set some things on a per service basis, like the nicelevel.
-#SSD_NICELEVEL="-19"
-# Or the ionice level. The format is class[:data] , just like the
-# --ionice start-stop-daemon parameter.
-#SSD_IONICELEVEL="2:2"
-
-# Pass ulimit parameters
-# If you are using bash in POSIX mode for your shell, note that the
-# ulimit command uses a block size of 512 bytes for the -c and -f
-# options
-#rc_ulimit="-u 30"
-
-# It's possible to define extra dependencies for services like so
-#rc_config="/etc/foo"
-#rc_need="openvpn"
-#rc_use="net.eth0"
-#rc_after="clock"
-#rc_before="local"
-#rc_provide="!net"
-
-# You can also enable the above commands here for each service. Below is an
-# example for service foo.
-#rc_foo_config="/etc/foo"
-#rc_foo_need="openvpn"
-#rc_foo_after="clock"
-
-# Below is an example for service foo-bar. Note that the '-' is illegal
-# in a shell variable name, so we convert it to an underscore.
-# example for service foo-bar.
-#rc_foo_bar_config="/etc/foo-bar"
-#rc_foo_bar_need="openvpn"
-#rc_foo_bar_after="clock"
-
-# You can also remove dependencies.
-# This is mainly used for saying which services do NOT provide net.
-#rc_net_tap0_provide="!net"
-
-# This is the subsystem type.
-# It is used to match against keywords set by the keyword call in the
-# depend function of service scripts.
-#
-# It should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-# If it is commented out, automatic detection will be used.
-#
-# The list below shows all possible settings as well as the host
-# operating systems where they can be used and autodetected.
-#
-# ""               - nothing special
-# "docker"         - Docker container manager (Linux)
-# "jail"           - Jail (DragonflyBSD or FreeBSD)
-# "lxc"            - Linux Containers
-# "openvz"         - Linux OpenVZ
-# "prefix"         - Prefix
-# "rkt"            - CoreOS container management system (Linux)
-# "subhurd"        - Hurd subhurds (to be checked)
-# "systemd-nspawn" - Container created by systemd-nspawn (Linux)
-# "uml"            - Usermode Linux
-# "vserver"        - Linux vserver
-# "xen0"           - Xen0 Domain (Linux and NetBSD)
-# "xenU"           - XenU Domain (Linux and NetBSD)
-#rc_sys=""
-
-# if  you use openrc-init, which is currently only available on Linux,
-# this is the default runlevel to activate after "sysinit" and "boot"
-# when booting.
-#rc_default_runlevel="default"
-
-# on Linux and Hurd, this is the number of ttys allocated for logins
-# It is used in the consolefont, keymaps, numlock and termencoding
-# service scripts.
-rc_tty_number=12
-
-##############################################################################
-# LINUX CGROUPS RESOURCE MANAGEMENT
-
-# This sets the mode used to mount cgroups.
-# "hybrid" mounts cgroups version 2 on /sys/fs/cgroup/unified and
-# cgroups version 1 on /sys/fs/cgroup.
-# "legacy" mounts cgroups version 1 on /sys/fs/cgroup
-# "unified" mounts cgroups version 2 on /sys/fs/cgroup
-#rc_cgroup_mode="hybrid"
-
-# This is a list of controllers which should be enabled for cgroups version 2.
-# If hybrid mode is being used, controllers listed here will not be
-# available for cgroups version 1.
-# This is a global setting.
-#rc_cgroup_controllers=""
-
-# This variable contains the cgroups version 2 settings for your services.
-# If this is set in this file, the settings will apply to all services.
-# If you want different settings for each service, place the settings in
-# /etc/conf.d/foo for service foo.
-# The format is to specify the setting and value followed by a newline.
-# Multiple settings and values can be specified.
-# For example, you would use this to set the maximum memory and maximum
-# number of pids for a service.
-#rc_cgroup_settings="
-#memory.max 10485760
-#pids.max max
-#"
-#
-# For more information about the adjustments that can be made with
-# cgroups version 2, see Documentation/cgroups-v2.txt in the linux kernel
-# source tree.
-#rc_cgroup_settings=""
-
-# This switch controls whether or not cgroups version 1 controllers are
-# individually mounted under
-# /sys/fs/cgroup in hybrid or legacy mode.
-#rc_controller_cgroups="YES"
-
-# The following settings allow you to set up values for the cgroups version 1
-# controllers for your services.
-# They can be set in this file;, however, if you do this, the settings
-# will apply to all of your services.
-# If you want different settings for each service, place the settings in
-# /etc/conf.d/foo for service foo.
-# The format is to specify the names of the settings followed by their
-# values. Each variable can hold multiple settings.
-# For example, you would use this to set the cpu.shares setting in the
-# cpu controller to 512 for your service.
-# rc_cgroup_cpu="
-# cpu.shares 512
-# "
-#
-# For more information about the adjustments that can be made with
-# cgroups version 1, see Documentation/cgroups-v1/* in the linux kernel
-# source tree.
-
-# Set the blkio controller settings for this service.
-#rc_cgroup_blkio=""
-
-# Set the cpu controller settings for this service.
-#rc_cgroup_cpu=""
-
-# Add this service to the cpuacct controller (any value means yes).
-#rc_cgroup_cpuacct=""
-
-# Set the cpuset controller settings for this service.
-#rc_cgroup_cpuset=""
-
-# Set the devices controller settings for this service.
-#rc_cgroup_devices=""
-
-# Set the hugetlb controller settings for this service.
-#rc_cgroup_hugetlb=""
-
-# Set the memory controller settings for this service.
-#rc_cgroup_memory=""
-
-# Set the net_cls controller settings for this service.
-#rc_cgroup_net_cls=""
-
-# Set the net_prio controller settings for this service.
-#rc_cgroup_net_prio=""
-
-# Set the pids controller settings for this service.
-#rc_cgroup_pids=""
-
-# Set this to YES if you want all of the processes in a service's cgroup
-# killed when the service is stopped or restarted.
-# Be aware that setting this to yes means all of a service's
-# child processes will be killed. Keep this in mind if you set this to
-# yes here instead of for the individual services in
-# /etc/conf.d/<service>.
-# To perform this cleanup manually for a stopped service, you can
-# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
-# rc-service <service> cgroup_cleanup.
-# The process followed in this cleanup is the following:
-# 1. send stopsig (sigterm if it isn't set) to all processes left in the
-# cgroup immediately followed by sigcont.
-# 2. Send sighup to all processes in the cgroup if rc_send_sighup is
-# yes.
-# 3. delay for rc_timeout_stopsec seconds.
-# 4. send sigkill to all processes in the cgroup unless disabled by
-# setting rc_send_sigkill to no.
-# rc_cgroup_cleanup="NO"
-
-# If this is yes, we will send sighup to the processes in the cgroup
-# immediately after stopsig and sigcont.
-#rc_send_sighup="NO"
-
-# This is the amount of time in seconds that we delay after sending sigcont
-# and optionally sighup, before we optionally send sigkill to all
-# processes in the # cgroup.
-# The default is 90 seconds.
-#rc_timeout_stopsec="90"
-
-# If this is set to no, we do not send sigkill to all processes in the
-# cgroup.
-#rc_send_sigkill="YES"
diff --git a/pkg/openrc/etc/runlevels/boot/hostname b/pkg/openrc/etc/runlevels/boot/hostname
deleted file mode 120000
index 2920d24..0000000
--- a/pkg/openrc/etc/runlevels/boot/hostname
+++ /dev/null
@@ -1 +0,0 @@
-/etc/init.d/hostname
\ No newline at end of file
diff --git a/pkg/openrc/etc/runlevels/boot/hwclock b/pkg/openrc/etc/runlevels/boot/hwclock
deleted file mode 120000
index 84d9672..0000000
--- a/pkg/openrc/etc/runlevels/boot/hwclock
+++ /dev/null
@@ -1 +0,0 @@
-/etc/init.d/hwclock
\ No newline at end of file
diff --git a/pkg/openrc/etc/runlevels/boot/loopback b/pkg/openrc/etc/runlevels/boot/loopback
deleted file mode 120000
index 22878c6..0000000
--- a/pkg/openrc/etc/runlevels/boot/loopback
+++ /dev/null
@@ -1 +0,0 @@
-/etc/init.d/loopback
\ No newline at end of file
diff --git a/pkg/openrc/etc/runlevels/boot/modules b/pkg/openrc/etc/runlevels/boot/modules
deleted file mode 120000
index 4886563..0000000
--- a/pkg/openrc/etc/runlevels/boot/modules
+++ /dev/null
@@ -1 +0,0 @@
-/etc/init.d/modules
\ No newline at end of file
diff --git a/pkg/openrc/etc/runlevels/boot/sysctl b/pkg/openrc/etc/runlevels/boot/sysctl
deleted file mode 120000
index b4ac535..0000000
--- a/pkg/openrc/etc/runlevels/boot/sysctl
+++ /dev/null
@@ -1 +0,0 @@
-/etc/init.d/sysctl
\ No newline at end of file
diff --git a/pkg/openrc/etc/runlevels/boot/termencoding b/pkg/openrc/etc/runlevels/boot/termencoding
deleted file mode 120000
index f7d1d33..0000000
--- a/pkg/openrc/etc/runlevels/boot/termencoding
+++ /dev/null
@@ -1 +0,0 @@
-/etc/init.d/termencoding
\ No newline at end of file
diff --git a/pkg/openrc/etc/runlevels/boot/urandom b/pkg/openrc/etc/runlevels/boot/urandom
deleted file mode 120000
index 0bae59f..0000000
--- a/pkg/openrc/etc/runlevels/boot/urandom
+++ /dev/null
@@ -1 +0,0 @@
-/etc/init.d/urandom
\ No newline at end of file
diff --git a/pkg/openrc/etc/runlevels/shutdown/killprocs b/pkg/openrc/etc/runlevels/shutdown/killprocs
deleted file mode 120000
index a26adc1..0000000
--- a/pkg/openrc/etc/runlevels/shutdown/killprocs
+++ /dev/null
@@ -1 +0,0 @@
-/etc/init.d/killprocs
\ No newline at end of file
diff --git a/pkg/openrc/etc/runlevels/shutdown/mount-ro b/pkg/openrc/etc/runlevels/shutdown/mount-ro
deleted file mode 120000
index 87cc256..0000000
--- a/pkg/openrc/etc/runlevels/shutdown/mount-ro
+++ /dev/null
@@ -1 +0,0 @@
-/etc/init.d/mount-ro
\ No newline at end of file
diff --git a/product/common/ROOTFS b/product/common/ROOTFS
index ae3807c..9eefe77 100644
--- a/product/common/ROOTFS
+++ b/product/common/ROOTFS
@@ -14,7 +14,7 @@ findutils
 sed
 gawk
 shadow
-openrc
 procps-ng
 psmisc
 file
+init