diff --git a/test_spectr/test_spectr.ino b/test_spectr/test_spectr.ino
new file mode 100644
index 0000000..ea7ad17
--- /dev/null
+++ b/test_spectr/test_spectr.ino
@@ -0,0 +1,209 @@
+#include <Adafruit_NeoPixel.h>
+
+#define PIN        2
+#define NUMPIXELS 264
+Adafruit_NeoPixel pixels(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800);
+
+#define ACT_COUNT 10
+#define ACT_DELAY 100
+
+#define ROUND_SIZE 3
+
+#define ANA_PIN    A1
+
+size_t rtt_adc_convs = 0;
+
+#define ADC_VAL_CNT 700
+int8_t adc_storage[ADC_VAL_CNT];
+
+void setup() {
+	cli();
+	/* For debug purposes */
+	Serial.begin(230400);
+	pinMode(ANA_PIN, INPUT);
+  pixels.setBrightness(255);
+  pixels.begin();
+  pixels.fill(pixels.Color(0xFF,0xFF,0xFF));
+  pixels.show();
+  delay(1000);
+	/* Init ADC and timer registers */
+	ADCSRA |= (1<<ADEN)  | (1<<ADIE) | (1<<ADATE);
+	ADMUX  |= (0<<ADLAR) | (1<<REFS0)| (1<<MUX0);
+	ADCSRB |= (1<<ADTS2) | (0<<ADTS0);
+
+	TCCR0B &=  ~((1<<2) | (1<<1) | (1<<0));
+	TCCR0B |=  (1<<1) | (1<<0);
+	DDRC |= 1<<5;
+	PORTC = 0x00;
+	sei();
+	ADCSRA |= (1<<ADSC);
+
+
+	return; 
+}
+
+void lshift_adc_vals(){
+	for(size_t i = ADC_VAL_CNT-1; i >= 1;i--){
+		adc_storage[i] = adc_storage[i-1];
+	}
+  
+  return;
+}
+
+uint8_t get_max_adc_val(size_t beginning, size_t end){
+	uint8_t val = 0x00;
+	for(size_t i = beginning; i < end;i++){
+
+		if( adc_storage[i] > 0 && (adc_storage[i] > val)){
+			val = adc_storage[i];
+		}else if( adc_storage[i] < 0 && (-adc_storage[i]) > val){
+			val = -adc_storage[i];
+		}
+	}
+	return val;
+}
+
+uint8_t get_avg_adc_val(size_t beginning, size_t end){
+	uint16_t val = 0x0000;
+	for(size_t i = beginning; i < end;i++){
+		if( adc_storage[i] > 0){
+			val += adc_storage[i];
+		}else {
+			val += -adc_storage[i];
+		}
+	}
+	return (val/(end-beginning))*1.41421356;
+}
+
+int8_t get_adc(){
+
+	ADCSRA |= (1<<ADSC);
+	while((ADCSRA >> ADSC) & 0x1){ /* Conversion in progress*/}
+	uint8_t val = ADCH;
+
+  return val;
+}
+
+uint32_t Wheel(byte WheelPos) {
+	if(WheelPos < 85) {
+		return pixels.Color(WheelPos * 3, 255 - WheelPos * 3, 0);
+	} else if(WheelPos < 170) {
+		WheelPos -= 85;
+		return pixels.Color(255 - WheelPos * 3, 0, WheelPos * 3);
+	} else {
+		WheelPos -= 170;
+		return pixels.Color(0, WheelPos * 3, 255 - WheelPos * 3);
+	}
+}
+
+void loop() {
+#if 0
+
+	static size_t ii = 0;
+	if(ii >= ROUND_SIZE){
+		pixels.fill(pixels.Color(0x00,0x00,0x00));
+		ii = 0;
+	}
+	for(size_t i = ii; i < NUMPIXELS; i+=ROUND_SIZE){
+		pixels.setPixelColor(i, pixels.Color(0x00, 0x00, (0xFF/ROUND_SIZE)*ii));
+	}
+	pixels.show();
+	delay(100);
+	ii++;
+#endif
+	PORTC ^= 1<<5;
+	/* Reference Point for the 100% Mark and the AGC */
+	uint8_t max_val = get_max_adc_val(0, ADC_VAL_CNT);
+	if(max_val < 20){
+		/* If the signal is very low, the AGC should not kick in */
+		max_val = 20;
+	}
+	/* We took to long to complete one Round Trip. Take all we have! */
+	if(rtt_adc_convs >= ADC_VAL_CNT){
+		rtt_adc_convs = ADC_VAL_CNT;
+	}
+	
+	uint8_t avg_last_rtt = get_avg_adc_val(0,rtt_adc_convs);
+	rtt_adc_convs = 0;
+#ifdef MAX_BAR
+	uint8_t reg_max = get_max_adc_val(0, rtt_adc_convs);
+#endif
+	/* Calculate the average loudness of the signal since the last RTT and
+	 * derive the height of the signal on the tower from it. */
+	float perc = (avg_last_rtt*1.0)/(max_val*1.0);
+	size_t height = NUMPIXELS * perc;
+
+	Serial.println(avg_last_rtt);
+
+#ifdef MAX_BAR
+	float regperc = (avg_last64*1.0)/(reg_max*1.0);
+	size_t regheight = NUMPIXELS * regperc;
+#else
+	size_t regheight = height;
+#endif
+	/* One circle on the top which falls down */
+	static size_t reg_height = 0;
+
+
+
+	if(regheight > reg_height){
+		reg_height = regheight;
+	}else if(regheight < reg_height){
+	
+		if(reg_height >= 2){
+			reg_height-=2;
+		}else{
+			reg_height = 0;
+		}
+
+	}
+
+	pixels.fill(pixels.Color(0x00,0x00,0x00));
+	/* Fill the tower */
+	for(size_t i = 0; i < height && i < NUMPIXELS; i++){
+		float mul =  1.0;
+		pixels.setPixelColor(i,
+			pixels.Color(((i*mul)/NUMPIXELS)*0xFF, 
+			(NUMPIXELS-(i*mul)/NUMPIXELS)*0xFF, 0x00));
+
+
+	}
+	static uint8_t stat = 0;
+	/* Fill the dropdown max value */
+	for(size_t i = reg_height; i < reg_height+ROUND_SIZE && 
+		i < NUMPIXELS; i++){
+
+		pixels.setPixelColor(i, Wheel(((i-reg_height)+stat) & 255));
+	}
+	stat++;
+	PORTC ^= 1<<5;
+	pixels.show();
+	return;
+ 
+}
+
+// Interrupt subroutine for ADC conversion complete interrupt
+ISR(ADC_vect)  
+{
+	/* Adjust the value in the ADC register to fit into an int8_t which is
+	 * centered around the 2.5V value ~. The maximum Amplitude is less than
+	 * 1V Vpp usually  */
+	uint16_t val = ADC;
+	int16_t symm = (val-(1024/2));
+	if(symm >=0){
+		symm >>= 1;
+		symm &=0xFF;
+	}else{
+		int16_t inv = -symm;
+		inv >>= 1;
+		inv &= 0xFF;
+		symm = - inv;
+
+	}
+	int8_t res = symm;
+	
+	/* Insert the gotten value into the array */
+	lshift_adc_vals();
+	adc_storage[0] = res;
+	rtt_adc_convs++;
+}