IT-Syndikat/its-ap-builder
14
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
its-ap-builder/access-points/doc-ap-reinstall.txt

685 lines
20 KiB
Text
Raw Normal View History

Initial
2016-06-06 01:39:25 +02:00
# Reinstall guide for Openwrt based APs (TL-WR841N/ND)
# ====================================================
alias $=true # make sure this file is a valid shell script
$ wget https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/OpenWrt-ImageBuilder-ar71xx-generic.Linux-x86_64.tar.bz2
$ tar -xf OpenWrt-ImageBuilder-ar71xx-generic.Linux-x86_64.tar.bz2
$ cd OpenWrt-ImageBuilder-ar71xx-generic.Linux-x86_64/
$ sh <WHEREVER>/doc-ap-reinstall.txt # yes, seriously
$ make image PROFILE=TLWR841 FILES=files/ PACKAGES="collectd collectd-mod-wireless collectd-mod-interface collectd-mod-load collectd-mod-network -firewall -ip6tables -kmod-ip6tables"
# Now you should get the binary for flashing at:
# bin/ar71xx/openwrt-ar71xx-generic-tl-wr841n-v10-squashfs-sysupgrade.bin
# If your ssh key is in the config you can now connect to any LAN port (orange)
# on the AP, trigger a failsafe reset, scp the image into /tmp and flash the AP (see below).
# If it's not just add it to files/etc/dropbear/authorized_keys before running make
# 1) trigger factory reset (deletes /dev/mtdblock3, i.e. /overlay):
$ firstboot -y
# type 'y' and ENTER
$ reboot -f
# 2) wait for the router to come back up, do the failsafe mode dance again
# finally and copy the image there:
$ scp bin/ar71xx/openwrt-ar71xx-generic-tl-wr841n-v10-squashfs-sysupgrade.bin root@192.168.1.1:/tmp
# 3) finally flash the AP:
$ sysupgrade openwrt-*.bin
# now connect the WAN port (blue) to the correct patch port and make sure this
# is connected to VLAN 2 on SW0 (ports 29,30,31,32,33,34 are for now)
# WTF?
# /bin/sh ignores lines that start with '#' and the 'alias' above makes sure '$'
# is not a command that exists, so everything in this file is ignored up the the
# shar(1) archive, neat huh?
# ---- shar archive follows ----
#!/bin/sh
# This is a shell archive (produced by GNU sharutils 4.15.2).
# To extract the files from this archive, save it to some FILE, remove
# everything before the '#!/bin/sh' line above, then type 'sh FILE'.
#
lock_dir=_sh06036
# Made on 2016-06-06 01:42 CEST by <dxld@Sam>.
# Source directory was '/home/dxld/var/build/OpenWrt-ImageBuilder-ar71xx-generic.Linux-x86_64'.
#
# Existing files will *not* be overwritten, unless '-c' is specified.
#
# This shar contains:
# length mode name
# ------ ---------- ------------------------------------------
# 611 -rw------- files/etc/collectd.conf
# 286 -rw-r--r-- files/etc/config/dhcp
# 136 -rw-r--r-- files/etc/config/dropbear
# 105 -rw-r--r-- files/etc/config/firewall
# 630 -rw-r--r-- files/etc/config/network
# 1063 -rw-r--r-- files/etc/config/system
# 0 -rw-r--r-- files/etc/config/ubootenv
# 325 -rw-r--r-- files/etc/config/wireless
# 390 -rw-r--r-- files/etc/dropbear/authorized_keys
# 503 -rwxr-xr-x files/etc/uci-defaults/50-config-from-mac
#
MD5SUM=${MD5SUM-md5sum}
f=`${MD5SUM} --version | egrep '^md5sum .*(core|text)utils'`
test -n "${f}" && md5check=true || md5check=false
${md5check} || \
echo 'Note: not verifying md5sums. Consider installing GNU coreutils.'
if test "X$1" = "X-c"
then keep_file=''
else keep_file=true
fi
echo=echo
save_IFS="${IFS}"
IFS="${IFS}:"
gettext_dir=
locale_dir=
set_echo=false
for dir in $PATH
do
if test -f $dir/gettext \
&& ($dir/gettext --version >/dev/null 2>&1)
then
case `$dir/gettext --version 2>&1 | sed 1q` in
*GNU*) gettext_dir=$dir
set_echo=true
break ;;
esac
fi
done
if ${set_echo}
then
set_echo=false
for dir in $PATH
do
if test -f $dir/shar \
&& ($dir/shar --print-text-domain-dir >/dev/null 2>&1)
then
locale_dir=`$dir/shar --print-text-domain-dir`
set_echo=true
break
fi
done
if ${set_echo}
then
TEXTDOMAINDIR=$locale_dir
export TEXTDOMAINDIR
TEXTDOMAIN=sharutils
export TEXTDOMAIN
echo="$gettext_dir/gettext -s"
fi
fi
IFS="$save_IFS"
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null
then if (echo -n test; echo 1,2,3) | grep n >/dev/null
then shar_n= shar_c='
'
else shar_n=-n shar_c= ; fi
else shar_n= shar_c='\c' ; fi
f=shar-touch.$$
st1=200112312359.59
st2=123123592001.59
st2tr=123123592001.5 # old SysV 14-char limit
st3=1231235901
if touch -am -t ${st1} ${f} >/dev/null 2>&1 && \
test ! -f ${st1} && test -f ${f}; then
shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"'
elif touch -am ${st2} ${f} >/dev/null 2>&1 && \
test ! -f ${st2} && test ! -f ${st2tr} && test -f ${f}; then
shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"'
elif touch -am ${st3} ${f} >/dev/null 2>&1 && \
test ! -f ${st3} && test -f ${f}; then
shar_touch='touch -am $3$4$5$6$2 "$8"'
else
shar_touch=:
echo
${echo} 'WARNING: not restoring timestamps. Consider getting and
installing GNU '\''touch'\'', distributed in GNU coreutils...'
echo
fi
rm -f ${st1} ${st2} ${st2tr} ${st3} ${f}
#
if test ! -d ${lock_dir} ; then :
else ${echo} "lock directory ${lock_dir} exists"
exit 1
fi
if mkdir ${lock_dir}
then ${echo} "x - created lock directory ${lock_dir}."
else ${echo} "x - failed to create lock directory ${lock_dir}."
exit 1
fi
# ============= files/etc/collectd.conf ==============
if test ! -d 'files'; then
mkdir 'files'
if test $? -eq 0
then ${echo} "x - created directory files."
else ${echo} "x - failed to create directory files."
exit 1
fi
fi
if test ! -d 'files/etc'; then
mkdir 'files/etc'
if test $? -eq 0
then ${echo} "x - created directory files/etc."
else ${echo} "x - failed to create directory files/etc."
exit 1
fi
fi
if test -n "${keep_file}" && test -f 'files/etc/collectd.conf'
then
${echo} "x - SKIPPING files/etc/collectd.conf (file already exists)"
else
${echo} "x - extracting files/etc/collectd.conf (text)"
sed 's/^X//' << 'SHAR_EOF' > 'files/etc/collectd.conf' &&
# Config file for collectd. More info: https://collectd.org/
# Note: Luci statistics will generate a new config and overwrite this file.
X
#Hostname "localhost"
#FQDNLookup true
BaseDir "/var/run/collectd"
Include "/etc/collectd/conf.d"
PIDFile "/var/run/collectd.pid"
PluginDir "/usr/lib/collectd"
TypesDB "/usr/share/collectd/types.db"
Interval 30
ReadThreads 2
X
LoadPlugin interface
LoadPlugin load
#LoadPlugin ping
X
<Plugin interface>
X IgnoreSelected false
X Interface "lan""
</Plugin>
X
LoadPlugin network
<Plugin network>
X Server "sozial.asozial" "25826"
X Forward false
</Plugin>
X
X
LoadPlugin wireless
SHAR_EOF
(set 20 16 03 14 20 20 43 'files/etc/collectd.conf'
eval "${shar_touch}") && \
chmod 0600 'files/etc/collectd.conf'
if test $? -ne 0
then ${echo} "restore of files/etc/collectd.conf failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/collectd.conf': 'MD5 check failed'
) << \SHAR_EOF
317af4e906f9877fb3942b2c969ec6f8 files/etc/collectd.conf
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/collectd.conf'` -ne 611 && \
${echo} "restoration warning: size of 'files/etc/collectd.conf' is not 611"
fi
fi
# ============= files/etc/config/dhcp ==============
if test ! -d 'files/etc'; then
mkdir 'files/etc'
if test $? -eq 0
then ${echo} "x - created directory files/etc."
else ${echo} "x - failed to create directory files/etc."
exit 1
fi
fi
if test ! -d 'files/etc/config'; then
mkdir 'files/etc/config'
if test $? -eq 0
then ${echo} "x - created directory files/etc/config."
else ${echo} "x - failed to create directory files/etc/config."
exit 1
fi
fi
if test -n "${keep_file}" && test -f 'files/etc/config/dhcp'
then
${echo} "x - SKIPPING files/etc/config/dhcp (file already exists)"
else
${echo} "x - extracting files/etc/config/dhcp (text)"
sed 's/^X//' << 'SHAR_EOF' > 'files/etc/config/dhcp' &&
X
config dnsmasq
X option listen 0
X
config dhcp 'lan'
X option interface 'lan'
X option ignore 1
X
config dhcp 'wan'
X option interface 'wan'
X option ignore '1'
X
config odhcpd 'odhcpd'
X option maindhcp '0'
X option leasefile '/tmp/hosts/odhcpd'
X option leasetrigger '/usr/sbin/odhcpd-update'
X
SHAR_EOF
(set 20 16 02 18 23 07 05 'files/etc/config/dhcp'
eval "${shar_touch}") && \
chmod 0644 'files/etc/config/dhcp'
if test $? -ne 0
then ${echo} "restore of files/etc/config/dhcp failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/config/dhcp': 'MD5 check failed'
) << \SHAR_EOF
14380207dcdfc80dcf7ad0f874385a4f files/etc/config/dhcp
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/config/dhcp'` -ne 286 && \
${echo} "restoration warning: size of 'files/etc/config/dhcp' is not 286"
fi
fi
# ============= files/etc/config/dropbear ==============
if test ! -d 'files/etc/config'; then
mkdir 'files/etc/config'
if test $? -eq 0
then ${echo} "x - created directory files/etc/config."
else ${echo} "x - failed to create directory files/etc/config."
exit 1
fi
fi
if test -n "${keep_file}" && test -f 'files/etc/config/dropbear'
then
${echo} "x - SKIPPING files/etc/config/dropbear (file already exists)"
else
${echo} "x - extracting files/etc/config/dropbear (text)"
sed 's/^X//' << 'SHAR_EOF' > 'files/etc/config/dropbear' &&
config dropbear
X option PasswordAuth 'off'
X option RootPasswordAuth 'off'
X option Port '22'
# option BannerFile '/etc/banner'
SHAR_EOF
(set 20 16 02 19 01 22 09 'files/etc/config/dropbear'
eval "${shar_touch}") && \
chmod 0644 'files/etc/config/dropbear'
if test $? -ne 0
then ${echo} "restore of files/etc/config/dropbear failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/config/dropbear': 'MD5 check failed'
) << \SHAR_EOF
4e428f3d36b40c3de857bf73d3bc27ce files/etc/config/dropbear
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/config/dropbear'` -ne 136 && \
${echo} "restoration warning: size of 'files/etc/config/dropbear' is not 136"
fi
fi
# ============= files/etc/config/firewall ==============
if test -n "${keep_file}" && test -f 'files/etc/config/firewall'
then
${echo} "x - SKIPPING files/etc/config/firewall (file already exists)"
else
${echo} "x - extracting files/etc/config/firewall (text)"
sed 's/^X//' << 'SHAR_EOF' > 'files/etc/config/firewall' &&
config defaults
X option syn_flood 1
X option input ACCEPT
X option output ACCEPT
X option forward ACCEPT
SHAR_EOF
(set 20 16 03 14 20 19 47 'files/etc/config/firewall'
eval "${shar_touch}") && \
chmod 0644 'files/etc/config/firewall'
if test $? -ne 0
then ${echo} "restore of files/etc/config/firewall failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/config/firewall': 'MD5 check failed'
) << \SHAR_EOF
3aca9392cad163a47cd8ed892ad1fbee files/etc/config/firewall
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/config/firewall'` -ne 105 && \
${echo} "restoration warning: size of 'files/etc/config/firewall' is not 105"
fi
fi
# ============= files/etc/config/network ==============
if test -n "${keep_file}" && test -f 'files/etc/config/network'
then
${echo} "x - SKIPPING files/etc/config/network (file already exists)"
else
${echo} "x - extracting files/etc/config/network (text)"
sed 's/^X//' << 'SHAR_EOF' > 'files/etc/config/network' &&
X
config interface 'loopback'
X option ifname 'lo'
X option proto 'static'
X option ipaddr '127.0.0.1'
X option netmask '255.0.0.0'
X
config interface 'apctl'
X option ifname 'eth1.2'
X option proto 'dhcp'
X
config interface 'lan'
X option type 'bridge'
X option ifname 'eth1'
X option proto 'static'
X
config interface 'recovery'
X option type 'bridge'
X option ifname 'eth0'
X option proto 'static'
X option ipaddr '192.168.1.1'
X option netmask '255.0.0.0'
X
X
config switch
X option name 'switch0'
X option reset '1'
X option enable '1'
X option enable_vlan '1'
X
config switch_vlan
X option device 'switch0'
X option vlan '1'
X option ports '1 2 3 4 0'
SHAR_EOF
(set 20 16 03 14 20 26 56 'files/etc/config/network'
eval "${shar_touch}") && \
chmod 0644 'files/etc/config/network'
if test $? -ne 0
then ${echo} "restore of files/etc/config/network failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/config/network': 'MD5 check failed'
) << \SHAR_EOF
e953d88ed06acffbef2e9086fa727fd7 files/etc/config/network
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/config/network'` -ne 630 && \
${echo} "restoration warning: size of 'files/etc/config/network' is not 630"
fi
fi
# ============= files/etc/config/system ==============
if test -n "${keep_file}" && test -f 'files/etc/config/system'
then
${echo} "x - SKIPPING files/etc/config/system (file already exists)"
else
${echo} "x - extracting files/etc/config/system (text)"
sed 's/^X//' << 'SHAR_EOF' > 'files/etc/config/system' &&
X
config system
X option hostname 'ITS-AP-unassigned'
X option timezone 'UTC'
X
config timeserver 'ntp'
X list server '0.openwrt.pool.ntp.org'
X list server '1.openwrt.pool.ntp.org'
X list server '2.openwrt.pool.ntp.org'
X list server '3.openwrt.pool.ntp.org'
X option enabled '1'
X option enable_server '0'
X
config led 'led_wan'
X option name 'WAN'
X option sysfs 'tp-link:green:wan'
X option trigger 'netdev'
X option mode 'link tx rx'
X option dev 'eth1'
X
config led 'led_lan1'
X option name 'LAN1'
X option sysfs 'tp-link:green:lan1'
X option trigger 'switch0'
X option port_mask '0x10'
X
config led 'led_lan2'
X option name 'LAN2'
X option sysfs 'tp-link:green:lan2'
X option trigger 'switch0'
X option port_mask '0x08'
X
config led 'led_lan3'
X option name 'LAN3'
X option sysfs 'tp-link:green:lan3'
X option trigger 'switch0'
X option port_mask '0x04'
X
config led 'led_lan4'
X option name 'LAN4'
X option sysfs 'tp-link:green:lan4'
X option trigger 'switch0'
X option port_mask '0x02'
X
config led 'led_wlan'
X option name 'WLAN'
X option sysfs 'tp-link:green:wlan'
X option trigger 'phy0tpt'
SHAR_EOF
(set 20 16 03 14 17 41 57 'files/etc/config/system'
eval "${shar_touch}") && \
chmod 0644 'files/etc/config/system'
if test $? -ne 0
then ${echo} "restore of files/etc/config/system failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/config/system': 'MD5 check failed'
) << \SHAR_EOF
9473b26be0e31d238df7fb716f2b4964 files/etc/config/system
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/config/system'` -ne 1063 && \
${echo} "restoration warning: size of 'files/etc/config/system' is not 1063"
fi
fi
# ============= files/etc/config/ubootenv ==============
if test -n "${keep_file}" && test -f 'files/etc/config/ubootenv'
then
${echo} "x - SKIPPING files/etc/config/ubootenv (file already exists)"
else
${echo} "x - extracting files/etc/config/ubootenv (empty)"
> 'files/etc/config/ubootenv' &&
(set 20 16 02 07 15 30 04 'files/etc/config/ubootenv'
eval "${shar_touch}") && \
chmod 0644 'files/etc/config/ubootenv'
if test $? -ne 0
then ${echo} "restore of files/etc/config/ubootenv failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/config/ubootenv': 'MD5 check failed'
) << \SHAR_EOF
d41d8cd98f00b204e9800998ecf8427e files/etc/config/ubootenv
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/config/ubootenv'` -ne 0 && \
${echo} "restoration warning: size of 'files/etc/config/ubootenv' is not 0"
fi
fi
# ============= files/etc/config/wireless ==============
if test -n "${keep_file}" && test -f 'files/etc/config/wireless'
then
${echo} "x - SKIPPING files/etc/config/wireless (file already exists)"
else
${echo} "x - extracting files/etc/config/wireless (text)"
sed 's/^X//' << 'SHAR_EOF' > 'files/etc/config/wireless' &&
config wifi-device radio0
X option type mac80211
X option channel 11
X option hwmode 11g
X option path 'platform/qca953x_wmac'
X option htmode HT20
X
config wifi-iface
X option device radio0
X option network lan
X option mode ap
X option ssid it-syndikat
X option encryption psk2
X option key '<WIRELESS KEY HERE>'
SHAR_EOF
(set 20 16 06 06 01 41 58 'files/etc/config/wireless'
eval "${shar_touch}") && \
chmod 0644 'files/etc/config/wireless'
if test $? -ne 0
then ${echo} "restore of files/etc/config/wireless failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/config/wireless': 'MD5 check failed'
) << \SHAR_EOF
06b38e06f26ea56e8a8e5f51a6566ff8 files/etc/config/wireless
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/config/wireless'` -ne 325 && \
${echo} "restoration warning: size of 'files/etc/config/wireless' is not 325"
fi
fi
# ============= files/etc/dropbear/authorized_keys ==============
if test ! -d 'files/etc/dropbear'; then
mkdir 'files/etc/dropbear'
if test $? -eq 0
then ${echo} "x - created directory files/etc/dropbear."
else ${echo} "x - failed to create directory files/etc/dropbear."
exit 1
fi
fi
if test -n "${keep_file}" && test -f 'files/etc/dropbear/authorized_keys'
then
${echo} "x - SKIPPING files/etc/dropbear/authorized_keys (file already exists)"
else
${echo} "x - extracting files/etc/dropbear/authorized_keys (text)"
sed 's/^X//' << 'SHAR_EOF' | uudecode &&
begin 600 files/etc/dropbear/authorized_keys
M<W-H+7)S82!!04%!0C-.>F%#,7EC,D5!04%!1$%104)!04%"05%#,41B=VMS
M>75-,FE652]M4U-18CAF8U14,W-M3T1Y96%Z=%!V<&8Q94\T.61N-$UE8T%C
M534X>G$R9S1$2W5M0S5Q,6)#<DUQ<&A9.65A*U534W)9<&8K6BLK9F5Z3W-0
M>&%D-$UR-&EX=3!(83A6;S1#3$-F1'AC07A::%EU;$%X;E!D,G<X9T)Y25%)
M56YM1UI"1WE!6'5$,%EX:2LR8W!N,VI'5TDQ3CDV8W=Y:%-Z63`O46UJ9F55
M8G%B*W!D:45J;2]*5$)U;R]S0FUF2FUD.5%A>4UV>$]Z,5)R>C%4=4\X.79M
M+U9L,5`K:TE&4W1O0G-%955(."M9<75)4'50<6=Q,V0V2"MI538X3DYT8G!9
M07=-2E,S,'5M-'5H=2]X3R]62&-L0V%F<4]U47994FMJ0DI!4DY0;4UL+T15
>8VET:$Y#5S)!=D1C=$IS6G!",6P@9'AL9$!%;&D*
`
end
SHAR_EOF
(set 20 16 02 19 01 22 39 'files/etc/dropbear/authorized_keys'
eval "${shar_touch}") && \
chmod 0644 'files/etc/dropbear/authorized_keys'
if test $? -ne 0
then ${echo} "restore of files/etc/dropbear/authorized_keys failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/dropbear/authorized_keys': 'MD5 check failed'
) << \SHAR_EOF
9641a516022df2dc59a071c9d16be7aa files/etc/dropbear/authorized_keys
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/dropbear/authorized_keys'` -ne 390 && \
${echo} "restoration warning: size of 'files/etc/dropbear/authorized_keys' is not 390"
fi
fi
# ============= files/etc/uci-defaults/50-config-from-mac ==============
if test ! -d 'files/etc/uci-defaults'; then
mkdir 'files/etc/uci-defaults'
if test $? -eq 0
then ${echo} "x - created directory files/etc/uci-defaults."
else ${echo} "x - failed to create directory files/etc/uci-defaults."
exit 1
fi
fi
if test -n "${keep_file}" && test -f 'files/etc/uci-defaults/50-config-from-mac'
then
${echo} "x - SKIPPING files/etc/uci-defaults/50-config-from-mac (file already exists)"
else
${echo} "x - extracting files/etc/uci-defaults/50-config-from-mac (text)"
sed 's/^X//' << 'SHAR_EOF' > 'files/etc/uci-defaults/50-config-from-mac' &&
#!/bin/sh
set -e
X
mac=$(cat /sys/class/net/eth1/address)
X
hostname=
channel=
if [ "$mac" = 60:e3:27:b8:16:ed ]; then
X hostname=cz-ap0
X channel=6
elif [ "$mac" = 60:e3:27:b8:09:db ]; then
X hostname=cz-ap1
X channel=12
elif [ "$mac" = 60:e3:27:ed:9b:b1 ]; then
X hostname=cz-ap2
X channel=1
fi
X
uci set system.@system[0].hostname=$hostname
uci commit system
uci set wireless.radio0.channel=$channel
uci commit wireless
echo $(uci get system.@system[0].hostname) > /proc/sys/kernel/hostname
SHAR_EOF
(set 20 16 03 20 16 53 15 'files/etc/uci-defaults/50-config-from-mac'
eval "${shar_touch}") && \
chmod 0755 'files/etc/uci-defaults/50-config-from-mac'
if test $? -ne 0
then ${echo} "restore of files/etc/uci-defaults/50-config-from-mac failed"
fi
if ${md5check}
then (
${MD5SUM} -c >/dev/null 2>&1 || ${echo} 'files/etc/uci-defaults/50-config-from-mac': 'MD5 check failed'
) << \SHAR_EOF
689a299be8256d569a668704a26d27c3 files/etc/uci-defaults/50-config-from-mac
SHAR_EOF
else
test `LC_ALL=C wc -c < 'files/etc/uci-defaults/50-config-from-mac'` -ne 503 && \
${echo} "restoration warning: size of 'files/etc/uci-defaults/50-config-from-mac' is not 503"
fi
fi
if rm -fr ${lock_dir}
then ${echo} "x - removed lock directory ${lock_dir}."
else ${echo} "x - failed to remove lock directory ${lock_dir}."
exit 1
fi
exit 0
Reference in a new issue Copy permalink