diff --git a/.gitignore b/.gitignore
index 6b33294..a77ee40 100644
--- a/.gitignore
+++ b/.gitignore
@@ -17,5 +17,6 @@
 *.app
 
 #other
-TSI_inout_ino/APIKey.h
+*APIKey.h
+*APIKey.php
 *~
diff --git a/ITS_Open_direct/ITS_Open_direct.ino b/ITS_Open_direct/ITS_Open_direct.ino
new file mode 100644
index 0000000..678f443
--- /dev/null
+++ b/ITS_Open_direct/ITS_Open_direct.ino
@@ -0,0 +1,471 @@
+/*
+
+Arduino --> ThingTweet via Ethernet
+The ThingTweet sketch is designed for the Arduino + Ethernet Shield.
+This sketch updates a Twitter status via the ThingTweet App
+(http://community.thingspeak.com/documentation/apps/thingtweet/) using HTTP POST.
+ThingTweet is a Twitter proxy web application that handles the OAuth.
+Getting Started with ThingSpeak and ThingTweet:
+* Sign Up for a New User Account for ThingSpeak - https://www.thingspeak.com/users/new
+* Link your Twitter account to the ThingTweet App - Apps / ThingTweet
+* Enter the ThingTweet API Key in this sketch under "ThingSpeak Settings"
+Arduino Requirements:
+* Arduino with Ethernet Shield or Arduino Ethernet
+* Arduino 1.0 IDE
+* Twitter account linked to your ThingSpeak account
+Network Requirements:
+
+* Ethernet port on Router
+* DHCP enabled on Router
+* Unique MAC Address for Arduino
+Created: October 17, 2011 by Hans Scharler (http://www.iamshadowlord.com)
+Updated: December 7, 2012 by Hans Scharler (http://www.iamshadowlord.com)
+Additional Credits:
+Example sketches from Arduino team, Ethernet by Adrian McEwen
+*/
+
+#include <SPI.h>
+#include <Ethernet.h>
+#include <EthernetUdp.h>
+
+#include "APIKey.h"
+
+
+char thingSpeakAddress[] = "api.thingspeak.com";
+
+// Local Network Settings
+byte mac[] = { 0xD4, 0x28, 0xB2, 0xFF, 0xA0, 0xA1 }; // Must be unique on local network
+
+unsigned int localPort = 8888;      // local port to listen for UDP packets
+
+// Variable Setup - check if these Variables are needed
+long lastConnectionTime = 0;
+boolean lastConnected = true;
+int failedCounter = 0;
+
+// NTP stuff
+//IPAddress timeServer(132, 163, 4, 101); // time-a.timefreq.bldrdoc.gov NTP server
+IPAddress timeServer(193,170,62,252); // ana austrian one
+// IPAddress timeServer(132, 163, 4, 102); // time-b.timefreq.bldrdoc.gov NTP server
+// IPAddress timeServer(132, 163, 4, 103); // time-c.timefreq.bldrdoc.gov NTP server
+
+const int NTP_PACKET_SIZE= 48; // NTP time stamp is in the first 48 bytes of the message
+
+byte packetBuffer[ NTP_PACKET_SIZE]; //buffer to hold incoming and outgoing packets
+
+// A UDP instance to let us send and receive packets over UDP
+EthernetUDP Udp;
+
+// Initialize Arduino Ethernet Client
+EthernetClient client;
+
+// Twitter response variables
+char serverName[] = "it-syndikat.org";  // twitter URL
+String currentLine = "";            // string to hold the text from server
+String tweet = "";                  // string to hold the tweet
+boolean readingTweet = false;       // if you're currently reading the tweet
+
+
+// Specific variables
+// Status
+int hsopen =2;
+int ethernetstatus = -1;
+/*
+0=not set
+1=read thingspeak response
+2=read tweet
+*/
+int readStatus=0;
+
+// Twitter message, intermediate part
+String tmsg = " Hackerspace at ";
+
+//debug options
+boolean debug = true;
+
+//LED and Switch pins
+const int ropen=5;
+const int rwait=6;
+const int rclosed=7;
+const int runknown=8;
+
+const int eok=A0;
+const int efail=A1;
+const int eunknown=A2;
+
+const int topen = 2;
+const int tclose = 3;
+
+// Status LED pins
+
+void setup()
+{
+  
+  pinMode(ropen, OUTPUT);      
+  pinMode(rwait, OUTPUT);      
+  pinMode(rclosed, OUTPUT);      
+  pinMode(runknown, OUTPUT);      
+
+  pinMode(eok, OUTPUT);      
+  pinMode(efail, OUTPUT);      
+  pinMode(eunknown, OUTPUT); 
+
+  // Taster
+  pinMode(topen, INPUT);      
+  pinMode(tclose, INPUT);      
+  digitalWrite(topen,HIGH);
+  digitalWrite(tclose,HIGH);
+
+  // Start Serial for debugging on the Serial Monitor
+  if(debug){
+    Serial.begin(9600);
+  }
+  // Start Ethernet on Arduino
+  setEth(-1);
+  setRoom(hsopen); 
+  startEthernet();
+
+  delay(1000);
+  
+  // Update Twitter via ThingTweet
+  TriggerServerReq();
+}
+
+void loop()
+{
+  switch(readStatus){
+    case 0:{
+      readStatus = readButtons();
+      break;
+    }
+    case 1:{
+      readStatus = readThingspeakResponse();
+      break;
+    }
+    case 2:{
+      readStatus = readServerStatus();
+      break;
+    }
+  }
+  
+  
+  
+  // Check if Arduino Ethernet needs to be restarted
+  if (failedCounter > 3 ) {
+    startEthernet();
+  }
+  lastConnected = client.connected();
+}
+
+int updateTwitterStatus(String tsData)
+{
+  if (client.connect(thingSpeakAddress, 80))
+  {
+    // Create HTTP POST Data
+    tsData = "api_key="+thingtweetAPIKey+"&status="+tsData;
+            
+    client.print("POST /apps/thingtweet/1/statuses/update HTTP/1.1\n");
+    client.print("Host: api.thingspeak.com\n");
+    client.print("Connection: close\n");
+    client.print("Content-Type: application/x-www-form-urlencoded\n");
+    client.print("Content-Length: ");
+    client.print(tsData.length());
+    client.print("\n\n");
+
+    client.print(tsData);
+    
+    lastConnectionTime = millis();
+    
+    if (client.connected())
+    {
+      if(debug){
+        Serial.println("Connecting to ThingSpeak...");
+        Serial.println();
+      } 
+      failedCounter = 0;
+      return 0;
+    }
+    else
+    {
+      failedCounter++;
+      if(debug){
+        Serial.println("Connection to ThingSpeak failed ("+String(failedCounter, DEC)+")");
+        Serial.println();
+      }
+      return -1;
+    }
+  }
+  else
+  {
+    failedCounter++;
+    if(debug){
+      Serial.println("Connection to ThingSpeak Failed ("+String(failedCounter, DEC)+")");
+      Serial.println();
+    }
+    lastConnectionTime = millis();
+    return -1;
+  }
+}
+
+int readButtons(){
+  int ret=0;
+  if((digitalRead(topen)==LOW)&&(hsopen!=1)){
+    setRoom(2);
+    if(updateTwitterStatus("Opening" + tmsg + read_time())==0){
+      hsopen=1;
+      ret=1;
+    }
+    else
+    {
+      hsopen=-1;
+    }
+    delay(3000);  
+    setRoom(hsopen);  
+  }
+  if((digitalRead(tclose)==LOW)&&(hsopen!=0)){
+    setRoom(2);
+    if(updateTwitterStatus("Closing" + tmsg + read_time())==0){
+      hsopen=0;
+      ret=1;
+    }
+    else
+    {
+      hsopen=-1;
+    }
+    delay(3000);
+    setRoom(hsopen);
+  }
+  return ret; 
+}
+
+int readThingspeakResponse(){
+// Print Update Response to Serial Monitor
+  if(client.available())
+  {
+    char c = client.read();
+    if(debug){
+      Serial.print(c);
+    }
+  }
+
+  // Disconnect from ThingSpeak
+  if (!client.connected() && lastConnected)
+  {
+    if(debug){
+      Serial.println("...disconnected");
+    }
+    client.stop();
+    return 0;
+  }
+  return 1;
+}
+
+void startEthernet()
+{
+  client.stop();
+  if(debug){
+    Serial.println("Connecting Arduino to network...");
+    Serial.println();
+  }
+  setEth(-1);
+  delay(1000);
+  
+  // Connect to network amd obtain an IP address using DHCP
+  if (Ethernet.begin(mac) == 0)
+  {
+    if(debug){
+      Serial.println("DHCP Failed, reset Arduino to try again");
+      Serial.println();
+    }
+    setEth(0);
+  }
+  else
+  {
+    if(debug){
+      Serial.println("Arduino connected to network using DHCP");
+      Serial.println();
+    }
+    Udp.begin(localPort);
+    setEth(1);
+  }
+  
+  delay(1000);
+}
+
+void setEth(int statuss){
+  if(debug){
+    Serial.println("Setting eth ");
+    Serial.println(statuss);
+  }
+  digitalWrite(eok,((statuss==1)?HIGH:LOW));
+  digitalWrite(efail,((statuss==0)?HIGH:LOW));
+  digitalWrite(eunknown,((statuss==-1)?HIGH:LOW));
+}
+
+void setRoom(int statuss){
+  if(debug){
+    Serial.println("Setting room ");
+    Serial.println(statuss);
+  }
+  digitalWrite(ropen,((statuss==1)?HIGH:LOW));
+  digitalWrite(rwait,((statuss==2)?HIGH:LOW));
+  digitalWrite(rclosed,((statuss==0)?HIGH:LOW));
+  digitalWrite(runknown,((statuss==-1)?HIGH:LOW));
+}
+
+//NTP Functions: Read the Time from NTP Server
+String read_time(){
+  String time= "";
+  if(debug){
+    Serial.println("readTime");
+  }
+  sendNTPpacket(timeServer); // send an NTP packet to a time server
+
+    // wait to see if a reply is available
+  for(int i = 50; i>0;i--){
+    if(debug){
+      Serial.print("iteration ");
+      Serial.println(i);
+    }
+    delay(50);  
+    if ( Udp.parsePacket() ) {  
+      // We've received a packet, read the data from it
+      Udp.read(packetBuffer,NTP_PACKET_SIZE);  // read the packet into the buffer
+  
+      //the timestamp starts at byte 40 of the received packet and is four bytes,
+      // or two words, long. First, esxtract the two words:
+  
+      unsigned long highWord = word(packetBuffer[40], packetBuffer[41]);
+      unsigned long lowWord = word(packetBuffer[42], packetBuffer[43]);  
+      // combine the four bytes (two words) into a long integer
+      // this is NTP time (seconds since Jan 1 1900):
+      unsigned long secsSince1900 = highWord << 16 | lowWord;  
+      if(debug){
+        Serial.print("Seconds since Jan 1 1900 = " );
+        Serial.println(secsSince1900);              
+    
+        // now convert NTP time into everyday time:
+        Serial.print("Unix time = ");
+      }
+      // Unix time starts on Jan 1 1970. In seconds, that's 2208988800:
+      const unsigned long seventyYears = 2208988800UL;    
+      // subtract seventy years:
+      unsigned long epoch = secsSince1900 - seventyYears;  
+      // print Unix time:
+      if(debug){
+        Serial.println(epoch);                              
+      }   
+      //time +="The UTC time is ";       // UTC is the time at Greenwich Meridian (GMT)
+      time +=((epoch + 3600)  % 86400L) / 3600; // print the hour (86400 equals secs per day)
+      time +=':';
+               
+      if ( ((epoch % 3600) / 60) < 10 ) {
+        // In the first 10 minutes of each hour, we'll want a leading '0'
+        time +="0";          
+      }
+      time +=((epoch  % 3600) / 60); // print the minute (3600 equals secs per minute)
+      time +=':';
+      
+      if ( (epoch % 60) < 10 ) {
+        // In the first 10 seconds of each minute, we'll want a leading '0'
+        time +="0";
+      }
+      time+=epoch %60;
+      if(debug){Serial.println(time);}     
+      return(time);
+    }
+  }
+}
+
+// send an NTP request to the time server at the given address
+unsigned long sendNTPpacket(IPAddress& address)
+{
+  // set all bytes in the buffer to 0
+  memset(packetBuffer, 0, NTP_PACKET_SIZE);
+  // Initialize values needed to form NTP request
+  // (see URL above for details on the packets)
+  packetBuffer[0] = 0b11100011;   // LI, Version, Mode
+  packetBuffer[1] = 0;     // Stratum, or type of clock
+  packetBuffer[2] = 6;     // Polling Interval
+  packetBuffer[3] = 0xEC;  // Peer Clock Precision
+  // 8 bytes of zero for Root Delay & Root Dispersion
+  packetBuffer[12]  = 49;
+  packetBuffer[13]  = 0x4E;
+  packetBuffer[14]  = 49;
+  packetBuffer[15]  = 52;
+
+  // all NTP fields have been given values, now
+  // you can send a packet requesting a timestamp:         
+  Udp.beginPacket(address, 123); //NTP requests are to port 123
+  Udp.write(packetBuffer,NTP_PACKET_SIZE);
+  Udp.endPacket();
+}
+
+/**
+* http://arduino.cc/en/Tutorial/TwitterClient
+*
+*
+*/
+void TriggerServerReq() {
+  // attempt to connect, and wait a millisecond:
+  if(debug){Serial.println("connecting to server...");}
+  if (client.connect(serverName, 80)) {
+    if(debug){Serial.println("making HTTP request...");}
+    // make HTTP GET request to server:
+    client.println("GET /status-s.php HTTP/1.1");
+    client.println("HOST: it-syndikat.org");
+    client.println();
+  }
+  // note the time of this connect attempt:
+  readStatus=2;
+}
+
+int readServerStatus() {  
+   if (client.connected()) {
+    if (client.available()) {
+      // read incoming bytes:
+      char inChar = client.read();
+
+      // add incoming byte to end of line:
+      currentLine += inChar;
+
+      // if you get a newline, clear the line:
+      if (inChar == '\n') {
+        currentLine = "";
+      }
+      // if the current line ends with <text>, it will
+      // be followed by the tweet:
+      if ( currentLine.endsWith("<status>")) {
+        // tweet is beginning. Clear the tweet string:
+        readingTweet = true;
+        tweet = "";
+      }
+      // if you're currently reading the bytes of a tweet,
+      // add them to the tweet String:
+      if (readingTweet) {
+        if (inChar != '<') {
+          tweet += inChar;
+        }
+        else {
+          // if you got a "<" character,
+          // you've reached the end of the tweet:
+          readingTweet = false;
+
+          if(debug){Serial.println("Message:");}  
+          if(debug){Serial.println(tweet);}
+          if(debug){Serial.println(tweet.startsWith("Opening", 1));}          
+          if(debug){Serial.println(tweet.startsWith("Closing", 1));}
+          if(tweet.startsWith("Opening", 1)){hsopen=1;}
+          else if(tweet.startsWith("Closing", 1)){hsopen=0;}
+          else {hsopen=-1;}
+          setRoom(hsopen);
+          // close the connection to the server:
+          client.stop();
+          return 0;
+        }
+      }
+    }  
+  }
+  return 2;
+}
+
diff --git a/ITS_Open_direct/update-t.php b/ITS_Open_direct/update-t.php
new file mode 100644
index 0000000..5864a23
--- /dev/null
+++ b/ITS_Open_direct/update-t.php
@@ -0,0 +1,32 @@
+<!--
+Copypasta:
+
+char thingSpeakAddress[] = "api.thingspeak.com";
+
+
+-->
+<?php
+
+
+$username = ($_POST['t_user']);
+$password = ($_POST['t_pass']);
+$message = ($_POST['t_update']);
+
+$url = 'http://twitter.com/statuses/update.xml';
+$curl_handle = curl_init();
+curl_setopt($curl_handle, CURLOPT_URL, "$url");
+curl_setopt($curl_handle, CURLOPT_CONNECTTIMEOUT, 2);
+curl_setopt($curl_handle, CURLOPT_RETURNTRANSFER, 1);
+curl_setopt($curl_handle, CURLOPT_POST, 1);
+curl_setopt($curl_handle, CURLOPT_POSTFIELDS, "status=$message");
+curl_setopt($curl_handle, CURLOPT_USERPWD, "$username:$password");
+$buffer = curl_exec($curl_handle);
+curl_close($curl_handle);
+if (empty($buffer)) {
+ echo "<p align=\"center\" >".'Sorry, due to an error your Twitter status could not be updated! Please check your username/password!'."</p>";
+} else {
+ echo "<p align=\"center\">".'Your Twitter status has successfully been updated!'."</p>";
+}
+?>
+
+
diff --git a/TSI_inout_ino/APIKey_template.h b/ITS_Open_twitter/APIKey_template.h
similarity index 100%
rename from TSI_inout_ino/APIKey_template.h
rename to ITS_Open_twitter/APIKey_template.h
diff --git a/TSI_inout_ino/TSI_inout_ino.ino b/ITS_Open_twitter/ITS_Open_twitter.ino
similarity index 100%
rename from TSI_inout_ino/TSI_inout_ino.ino
rename to ITS_Open_twitter/ITS_Open_twitter.ino