Add arduino-mk Makefile and fix build

This commit is contained in:
Daniel Gröber 2017-03-06 13:28:30 +01:00
parent 3a0663bd70
commit 623d50b873
2 changed files with 154 additions and 151 deletions

View file

@ -54,102 +54,6 @@ const int rlight = 6;
const int topen = 2; const int topen = 2;
const int tclose = 3; const int tclose = 3;
// Status LED pins
void setup()
{
pinMode(glight, OUTPUT);
pinMode(rlight, OUTPUT);
// Buttons with pullup resistor
pinMode(topen, INPUT);
pinMode(tclose, INPUT);
digitalWrite(topen,HIGH);
digitalWrite(tclose,HIGH);
// Start Serial for debugging on the Serial Monitor
if(debug){
Serial.begin(9600);
}
// Start Ethernet on Arduino
setEth(-1);
setRoom(2);
Timer1.initialize(20000); // 50 mal die Sekunde
Timer1.attachInterrupt(setLeds);
startEthernet();
delay(1000);
// Get current Status
RequestState();
}
void loop()
{
readButtons();
launchUpdate();
}
void readButtons(){
int ret=0;
if((digitalRead(topen)==LOW)&&(hsopen!=1)){
//startEthernet();
setRoom(2);
TriggerServerUpdate(true);
}
if((digitalRead(tclose)==LOW)&&(hsopen!=0)){
//startEthernet();
setRoom(2);
TriggerServerUpdate(false);
}
}
void launchUpdate(){
if(update==1){
RequestPing();
RequestState();
update = 0;
}
}
void startEthernet()
{
client.stop();
if(debug){
Serial.println("Connecting Arduino to network...");
Serial.println();
}
setEth(-1);
delay(1000);
// Connect to network amd obtain an IP address using DHCP
if (Ethernet.begin(mac) == 0)
{
if(debug){
Serial.println("DHCP Failed, reset Arduino to try again");
Serial.println();
}
setEth(0);
}
else
{
if(debug){
Serial.println("Arduino connected to network using DHCP");
Serial.println();
}
setEth(1);
}
if(debug){
Serial.println("DONE");
Serial.println();
}
delay(1000);
}
void setLeds(){ void setLeds(){
if (pingtimer>=0) if (pingtimer>=0)
{ {
@ -180,7 +84,7 @@ void setLeds(){
analogWrite(glight, (255/(ledspan/2)*ledtimer));//fade up analogWrite(glight, (255/(ledspan/2)*ledtimer));//fade up
}else{ }else{
analogWrite(glight, 255-(255/(ledspan/2)*(ledtimer-(ledspan/2))));//fade down analogWrite(glight, 255-(255/(ledspan/2)*(ledtimer-(ledspan/2))));//fade down
} }
analogWrite(rlight, 0); analogWrite(rlight, 0);
break; break;
} }
@ -201,10 +105,10 @@ void setLeds(){
case 2:{ // wait case 2:{ // wait
// fade red and green // fade red and green
if(ledtimer < (ledspan/2)){ if(ledtimer < (ledspan/2)){
int tmp=(255/(ledspan/2)*ledtimer); int tmp=(255/(ledspan/2)*ledtimer);
analogWrite(glight, tmp);//fade up analogWrite(glight, tmp);//fade up
analogWrite(rlight, tmp);//fade up analogWrite(rlight, tmp);//fade up
}else{ }else{
int tmp = 255-(255/(ledspan/2)*(ledtimer-(ledspan/2))); int tmp = 255-(255/(ledspan/2)*(ledtimer-(ledspan/2)));
analogWrite(glight, tmp);//fade down analogWrite(glight, tmp);//fade down
@ -212,17 +116,17 @@ void setLeds(){
} }
break; break;
} }
case -1:{ // unknown case -1:{ // unknown
// fade red // fade red
if(ledtimer < (ledspan/2)){ if(ledtimer < (ledspan/2)){
analogWrite(rlight, (255/(ledspan/2)*ledtimer));//fade up analogWrite(rlight, (255/(ledspan/2)*ledtimer));//fade up
}else{ }else{
analogWrite(rlight, 255-(255/(ledspan/2)*(ledtimer-(ledspan/2))));//fade down analogWrite(rlight, 255-(255/(ledspan/2)*(ledtimer-(ledspan/2))));//fade down
} }
analogWrite(glight, 0); analogWrite(glight, 0);
break; break;
} }
} }
break; break;
} }
} }
@ -235,7 +139,7 @@ void setLeds(){
if ( checktimer >= checkspan ) { if ( checktimer >= checkspan ) {
checktimer = 0; checktimer = 0;
update=1; update=1;
} }
} }
void setEth(int statuss){ void setEth(int statuss){
@ -256,53 +160,42 @@ void setRoom(int statuss){
setLeds(); setLeds();
} }
void startEthernet()
void RequestState() { {
TriggerServerReq("/status-s.php",0); client.stop();
} if(debug){
Serial.println("Connecting Arduino to network...");
Serial.println();
void RequestPing() {
TriggerServerReq("/ping-get.php?apikey="+pingAPIKey,1);
}
void TriggerServerReq(String s, int mode) {
// attempt to connect, and wait a millisecond:
if(debug){Serial.println("connecting to server... Status req");}
if (client.connect(serverName, 80)) {
if(debug){Serial.println("making HTTP request...");}
// make HTTP GET request to server:
client.println("GET "+ s +" HTTP/1.1");
client.println("HOST: it-syndikat.org");
client.println("Connection: close");
client.println();
readServerStatus(mode);
}else{
if(debug){Serial.println("Not connected...");}
} }
// note the time of this connect attempt: setEth(-1);
} delay(1000);
void TriggerServerUpdate(boolean stat) { // Connect to network amd obtain an IP address using DHCP
// attempt to connect, and wait a millisecond: if (Ethernet.begin(mac) == 0)
if(debug){Serial.println("connecting to server... Update Req");} {
if (client.connect(serverName, 80)) { if(debug){
if(debug){Serial.println("making HTTP request...");} Serial.println("DHCP Failed, reset Arduino to try again");
// make HTTP GET request to server: Serial.println();
String s =(stat?"true":"false"); }
client.println("GET /update.php?open=" + s + "&apikey="+serverAPIKey+" HTTP/1.1"); setEth(0);
client.println("HOST: it-syndikat.org");
client.println("Connection: close");
client.println();
readServerStatus(0);
}else{
if(debug){Serial.println("Not connected...");}
} }
// note the time of this connect attempt: else
{
if(debug){
Serial.println("Arduino connected to network using DHCP");
Serial.println();
}
setEth(1);
}
if(debug){
Serial.println("DONE");
Serial.println();
}
delay(1000);
} }
//reads out the status returned by the server and sets the LED's appropriately. //reads out the status returned by the server and sets the LED's appropriately.
//the mode is defied by the intended call: //the mode is defied by the intended call:
int readServerStatus(int mode) { int readServerStatus(int mode) {
char lastsign='0'; char lastsign='0';
boolean readStatus = false; boolean readStatus = false;
@ -313,7 +206,7 @@ int readServerStatus(int mode) {
// add incoming byte to end of line: // add incoming byte to end of line:
currentLine += inChar; currentLine += inChar;
if(debug){Serial.print(inChar);} if(debug){Serial.print(inChar);}
// if you get a newline, clear the line: // if you get a newline, clear the line:
@ -324,7 +217,7 @@ int readServerStatus(int mode) {
if(debug){Serial.println("##END OF HEADER##");} if(debug){Serial.println("##END OF HEADER##");}
} }
} }
if (readStatus) { if (readStatus) {
if(currentLine.startsWith("true", 0)){ if(currentLine.startsWith("true", 0)){
if(debug){Serial.println("");} if(debug){Serial.println("");}
@ -354,21 +247,124 @@ int readServerStatus(int mode) {
// close the connection to the server: // close the connection to the server:
client.stop(); client.stop();
return 0; return 0;
} }
} }
if (inChar != '\r') {// removes /r so we dan test if the header end with two newlines, hacky but works. if (inChar != '\r') {// removes /r so we dan test if the header end with two newlines, hacky but works.
lastsign = inChar; lastsign = inChar;
} }
} }
} }
setRoom(-1); setRoom(-1);
client.stop(); client.stop();
} }
void TriggerServerReq(String s, int mode) {
// attempt to connect, and wait a millisecond:
if(debug){Serial.println("connecting to server... Status req");}
if (client.connect(serverName, 80)) {
if(debug){Serial.println("making HTTP request...");}
// make HTTP GET request to server:
client.println("GET "+ s +" HTTP/1.1");
client.println("HOST: it-syndikat.org");
client.println("Connection: close");
client.println();
readServerStatus(mode);
}else{
if(debug){Serial.println("Not connected...");}
}
// note the time of this connect attempt:
}
void RequestState() {
TriggerServerReq("/status-s.php",0);
}
// Status LED pins
void setup()
{
pinMode(glight, OUTPUT);
pinMode(rlight, OUTPUT);
// Buttons with pullup resistor
pinMode(topen, INPUT);
pinMode(tclose, INPUT);
digitalWrite(topen,HIGH);
digitalWrite(tclose,HIGH);
// Start Serial for debugging on the Serial Monitor
if(debug){
Serial.begin(9600);
}
// Start Ethernet on Arduino
setEth(-1);
setRoom(2);
Timer1.initialize(20000); // 50 mal die Sekunde
Timer1.attachInterrupt(setLeds);
startEthernet();
delay(1000);
// Get current Status
RequestState();
}
void TriggerServerUpdate(boolean stat) {
// attempt to connect, and wait a millisecond:
if(debug){Serial.println("connecting to server... Update Req");}
if (client.connect(serverName, 80)) {
if(debug){Serial.println("making HTTP request...");}
// make HTTP GET request to server:
String s =(stat?"true":"false");
client.println("GET /update.php?open=" + s + "&apikey="+serverAPIKey+" HTTP/1.1");
client.println("HOST: it-syndikat.org");
client.println("Connection: close");
client.println();
readServerStatus(0);
}else{
if(debug){Serial.println("Not connected...");}
}
// note the time of this connect attempt:
}
void readButtons(){
int ret=0;
if((digitalRead(topen)==LOW)&&(hsopen!=1)){
//startEthernet();
setRoom(2);
TriggerServerUpdate(true);
}
if((digitalRead(tclose)==LOW)&&(hsopen!=0)){
//startEthernet();
setRoom(2);
TriggerServerUpdate(false);
}
}
void RequestPing() {
TriggerServerReq("/ping-get.php?apikey="+pingAPIKey,1);
}
void launchUpdate(){
if(update==1){
RequestPing();
RequestState();
update = 0;
}
}
void loop()
{
readButtons();
launchUpdate();
}
//This just reads the server return and logs it to the serial //This just reads the server return and logs it to the serial
// @deprecated // @deprecated
void readServerReturn() { void readServerReturn() {
//if(debug){Serial.println("readServerReturn ... ");} //if(debug){Serial.println("readServerReturn ... ");}
while(client.connected()) { while(client.connected()) {
if (client.available()) { if (client.available()) {
@ -380,4 +376,3 @@ void readServerReturn() {
if(debug){Serial.println("disconnecting.");} if(debug){Serial.println("disconnecting.");}
client.stop(); client.stop();
} }

View file

@ -0,0 +1,8 @@
ARDUINO_DIR = /usr/share/arduino
ARDMK_DIR = /usr/share/arduino
AVR_TOOLS_DIR = /usr
BOARD_TAG = uno
ARDUINO_LIBS = Ethernet SPI
include $(ARDMK_DIR)/Arduino.mk