ITSynOpen/ITS_Open_direct_2fb/ITS_Open_direct_2fb.ino

/*
IT-Syndikat Open device Firmware for the wooden Device with two fat buttons

Network Requirements:

* Ethernet port on Router
* DHCP enabled on Router
* Unique MAC Address for Arduino

Additional Credits:
Example sketches from Arduino team, Ethernet by Adrian McEwen
Based on the Ethernet to Thingspeak exaple  by Hans Scharler
*/

#include <Ethernet.h>
#include <SPI.h>

#include "APIKey.h"
#include "TimerOne.h"

// Must be unique on local network
byte mac[] = {0xD4, 0xBA, 0xD9, 0x9A, 0x7C, 0x95};

// Initialize Arduino Ethernet Client
EthernetClient client;

// Twitter response variables
#define SERVER_DOMAIN "spaceapi.it-syndikat.org"  // URL

// Specific variables
// Status
int hsopen;
int ethernetstatus;

int ledtimer = 0;
const int ledspan = 100;

int pingtimer = -1;
const int pingspan = 250;

int checktimer = 0;
const int checkspan = 1000;

int update = 0;

// debug options
boolean debug = true;

// LED and Switch pins
const int glight = 5;
const int rlight = 6;

const int topen = 2;
const int tclose = 3;

const int beeper = A5;

#define MODE_OPEN_STATE 0
#define MODE_PING_STATE 1

void setLeds() {
  if (pingtimer >= 0) {
    if (hsopen) {  // If space is not closed, beep three times with
      // beep
      if ((pingtimer > 220) && ((pingtimer / 5) % 2 == 1)) {
        digitalWrite(beeper, HIGH);
      } else {
        digitalWrite(beeper, LOW);
      }

    } else {  // if closed, beep once
      // beep
      if ((pingtimer > 240) && ((pingtimer / 5) % 2 == 1)) {
        digitalWrite(beeper, HIGH);
      } else {
        digitalWrite(beeper, LOW);
      }
    }
    // blink like crazy
    if ((pingtimer / 2) % 2 == 1) {
      analogWrite(rlight, 255);
      analogWrite(glight, 255);
    } else {
      analogWrite(rlight, 0);
      analogWrite(glight, 0);
    }
    pingtimer--;
  } else {
    switch (ethernetstatus) {
      case 0: {  // ethernet fail
        // blink red
        if (ledtimer < (ledspan / 2)) {
          analogWrite(rlight, 255);
        } else {
          analogWrite(rlight, 0);
        }
        analogWrite(glight, 0);
        break;
      }
      case -1: {  // ethernet unknown
        // fade green
        if (ledtimer < (ledspan / 2)) {
          analogWrite(glight, (255 / (ledspan / 2) * ledtimer));  // fade up
        } else {
          analogWrite(glight, 255 - (255 / (ledspan / 2) *
                                     (ledtimer - (ledspan / 2))));  // fade down
        }
        analogWrite(rlight, 0);
        break;
      }
      case 1: {  // ethernet ok
        switch (hsopen) {
          case 0: {  // closed
            // red
            analogWrite(rlight, 255);
            analogWrite(glight, 0);
            break;
          }
          case 1: {  // open
            // green
            analogWrite(rlight, 0);
            analogWrite(glight, 255);
            break;
          }
          case 2: {  // wait
            // fade red and green
            if (ledtimer < (ledspan / 2)) {
              int tmp = (255 / (ledspan / 2) * ledtimer);
              analogWrite(glight, tmp);  // fade up
              analogWrite(rlight, tmp);  // fade up

            } else {
              int tmp =
                  255 - (255 / (ledspan / 2) * (ledtimer - (ledspan / 2)));
              analogWrite(glight, tmp);  // fade down
              analogWrite(rlight, tmp);  // fade down
            }
            break;
          }
          case -1: {  // unknown
            // fade red
            if (ledtimer < (ledspan / 2)) {
              analogWrite(rlight, (255 / (ledspan / 2) * ledtimer));  // fade up
            } else {
              analogWrite(rlight,
                          255 - (255 / (ledspan / 2) *
                                 (ledtimer - (ledspan / 2))));  // fade down
            }
            analogWrite(glight, 0);
            break;
          }
        }
        break;
      }
    }
    ledtimer++;
    if (ledtimer >= ledspan) {
      ledtimer = 0;
    }
  }
  checktimer++;
  if (checktimer >= checkspan) {
    checktimer = 0;
    update = 1;
  }
}

void setEth(int statuss) {
  ethernetstatus = statuss;
  if (debug) {
    Serial.println("Setting eth ");
    Serial.println(statuss);
  }
  setLeds();
}

void setRoom(int statuss) {
  hsopen = statuss;
  if (debug) {
    Serial.print("Setting room ");
    Serial.println(statuss);
  }
  setLeds();
}

void startEthernet() {
  client.stop();
  if (debug) {
    Serial.println("Connecting Arduino to network...");
    Serial.println();
  }
  setEth(-1);
  delay(1000);

  // Connect to network amd obtain an IP address using DHCP
  if (Ethernet.begin(mac) == 0) {
    if (debug) {
      Serial.println("DHCP Failed, reset Arduino to try again");
      Serial.println();
    }
    setEth(0);
  } else {
    if (debug) {
      Serial.println("Arduino connected to network using DHCP");
      Serial.println();
    }
    setEth(1);
  }
  if (debug) {
    Serial.println("DONE");
    Serial.println();
  }
  delay(1000);
}

// reads out the status returned by the server and sets the LED's appropriately.
// the mode is defied by the intended call:
void readServerStatus(int mode) {
  char lastsign = '0';
  boolean readStatus = false;
  String currentLine = "";  // string to hold the text from server

  while (client.connected()) {
    if (client.available()) {
      // read incoming bytes:
      char inChar = client.read();

      // add incoming byte to end of line:
      currentLine += inChar;

      if (debug) {
        Serial.print(inChar);
      }

      // if you get a newline, clear the line:
      if (inChar == '\n') {
        currentLine = "";
        if (lastsign == '\n') {  // /r/n /r/n is the end of a header
          readStatus = true;     // start to parse the content of the line
          if (debug) {
            Serial.println("##END OF HEADER##");
          }
        }
      }

      if (readStatus) {
        if (currentLine.startsWith("true", 0)) {
          if (debug) {
            Serial.println("");
          }
          switch (mode) {
            case MODE_OPEN_STATE:
              setRoom(1);
              break;
            case MODE_PING_STATE:
              if (debug) {
                Serial.println("Wink Wink");
              }
              pingtimer = pingspan;
              break;
          }
          // close the connection to the server:
          client.stop();
          return;
        }
        if (currentLine.startsWith("false", 0)) {
          if (debug) {
            Serial.println("");
          }
          switch (mode) {
            case MODE_OPEN_STATE:
              setRoom(0);
              break;
            case MODE_PING_STATE:
              if (debug) {
                Serial.println("No Wink");
              }
              break;
          }
          // close the connection to the server:
          client.stop();
          return;
        }
      }
      if (inChar != '\r') {  // removes /r so we dan test if the header end with
                             // two newlines, hacky but works.
        lastsign = inChar;
      }
    }
  }
  setRoom(-1);
  client.stop();
}

void TriggerServerReq(String req, int mode) {
  // attempt to connect, and wait a millisecond:
  if (debug) {
    Serial.println("connecting to server... Status req");
  }
  if (client.connect(SERVER_DOMAIN, 80)) {
    if (debug) {
      Serial.println("making HTTP request: " + req);
    }
    // make HTTP request to server:
    client.println(req + " HTTP/1.1");
    client.println("HOST: " SERVER_DOMAIN);
    client.println("Connection: close");
    client.println();
    readServerStatus(mode);
  } else {
    if (debug) {
      Serial.println("Not connected...");
    }
  }
  // note the time of this connect attempt:
}

void RequestState() {
  TriggerServerReq("GET /api/status-s.php", MODE_OPEN_STATE);
}

// Status LED pins

void setup() {
  pinMode(glight, OUTPUT);
  pinMode(rlight, OUTPUT);
  pinMode(beeper, OUTPUT);
  digitalWrite(beeper, LOW);

  // Buttons with pullup resistor
  pinMode(topen, INPUT);
  pinMode(tclose, INPUT);
  digitalWrite(topen, HIGH);
  digitalWrite(tclose, HIGH);

  // Start Serial for debugging on the Serial Monitor
  if (debug) {
    Serial.begin(9600);
  }
  // Start Ethernet on Arduino
  setEth(-1);
  setRoom(2);

  Timer1.initialize(20000);  // 50 mal die Sekunde
  Timer1.attachInterrupt(setLeds);

  startEthernet();

  delay(1000);

  // Get current Status
  RequestState();
}

void readButtons() {
  if ((digitalRead(topen) == LOW) && (hsopen != 1)) {
    // startEthernet();
    setRoom(2);
    TriggerServerReq("POST /api/update.php?open=true&apikey=" UPDATE_API_KEY, MODE_OPEN_STATE);
  }
  if ((digitalRead(tclose) == LOW) && (hsopen != 0)) {
    // startEthernet();
    setRoom(2);
    TriggerServerReq("POST /api/update.php?open=false&apikey=" UPDATE_API_KEY, MODE_OPEN_STATE);
  }
}

void RequestPing() {
  TriggerServerReq("POST /api/ping-get.php?apikey=" PING_GET_API_KEY, MODE_PING_STATE);
}

void launchUpdate() {
  if (update == 1) {
    RequestPing();
    RequestState();
    update = 0;
  }
}

void loop() {
  readButtons();
  launchUpdate();
}

// This just reads the server return and logs it to the serial
//@deprecated
void readServerReturn() {
  // if(debug){Serial.println("readServerReturn ... ");}
  while (client.connected()) {
    if (client.available()) {
      char c = client.read();
      if (debug) {
        Serial.print(c);
      }
    }
  }
  if (debug) {
    Serial.println();
  }
  if (debug) {
    Serial.println("disconnecting.");
  }
  client.stop();
}